Tuning and Repairs
Applying Bar Stencils
posted 2009 Oct 01 Hi Everyone! Cleaning up an old saw and making it look new again with a paint job and decals can be a rewarding experience. However, many of the old saws were originally provided with bars...Read on...
Applying Decals
posted 2009 Oct 01 Hi Everyone, Decals are the final touch to a project and can really change the way a refurbished unit looks. Some would agree that a unit looks “naked” without its decals! Here we are providing...Read on...
Adjustment and Tuning of a Chainsaw Carburetor
posted 2009 Jun 08 Carburetor Adjustment for Chainsaws Carburetor adjustment is critical on chain saws and other two-cycle engines. An adjustment that is too rich will cause a saw to smoke, have insufficient power, result in additional carbon build...Read on...
Fiberglass Repair of Plastic Chainsaw Parts
posted 2009 Jun 08 Fiberglass/Epoxy repair for plastic parts and gas tanks:1. Remove the gas tank or plastic cover from the saw.2. Thoroughly clean the broken area with rubbing alcohol or another quick evaporating solvent.3. Apply a thin coat...Read on...
How to Remove a Chainsaw Flywheel Without Special Tools
posted 2009 Jun 08 How to replace a flywheel;1. Remove the clutch starter recoil cover from the saw.2. Remove the bar and chain from the saw.3. Remove the top cover on the saw to expose the spark plug4. Remove...Read on...
