(2 in stock)
jonsered 455 chainsaw cylinder bolt set
Part: set of 4 cylinder / head bolts. Part # 725 53 45-55 Condition: good used/working shape Fits: Jonsereds 455, 535 and others
(1 in stock)
Jonsered 455 Chainsaw late model chain brake assembly complete
Complete late model chain brake hand guard assembly 503 11 94-01 In good used shape Fits Jonsered 455 and others 525 535 450 520sp 520 sp
Jonsered 455 Chainsaw late model chain brake assembly complete #2
Complete late model chain brake hand guard assembly 503 11 94-01 In good used shape. Brake band shows some wear. Note, we have a few of these, picuture is for reference only. Fits Jonsered 455 and others 525 535 450 520sp 520 sp
Jonsered 455 Chainsaw late model chain brake assembly complete #4
Complete late model chain brake hand guard assembly 503 11 94-01 In good used shape. Top is missing some bits. See photos. Fits Jonsered 455 and others 525 535 450 520sp 520 sp
jonsered 455 chainsaw lot of assorted hardware
Part: lot of misc. hardware- nuts, bolts, screws, wrist pin, bering, catcher (includes everything pictured) Condition: good used/working order Fits: Jonsereds 455 and some other models
jonsered 455 chainsaw lot of assorted hardware #2
Part: lot of misc. hardware- nuts, bolts, screws (includes everything pictured) Condition: good used/working order Fits: Jonsereds 455 and some other models
Jonsered 455 Chainsaw Muffler Assembly (without bracket)
Part: Muffler assembly Condition: good used/working condition. Has surface rust Fits: Jonsered 455
(1 in stock)
Jonsered 455 Chainsaw Oil pipe
Part: Oil pipe / line Condition: good used/working condition Fits: Jonsered 455
jonsered 455 chainsaw rear handle support housing
Part: rear handle support bottom / base Part # 503 41 43-01 Condition: good used/working order, some small cosmetic chips on the very bottom plastic edge Fits: Jonsered 455, 450, 525, 535, 520sp
(1 in stock)
Jonsered 455 Chainsaw Rear Trigger Handle
Part: Rear trigger handle. Includes throttle trigger Condition: good used/working condition Fits: Jonsered 455
jonsered 455 chainsaw starter pawl and stud set
Part: set of starter pawls and studs for the flywheel. Part #s 503 41 22-01 & 501 64 67-01. Condition: good used/working shape Fits: Jonsered 455 and some other models.
(2 in stock)
Jonsered 455 Chainsaw Throttle Link
Part: Throttle Link Condition: good used/working condition Fits: Jonsered 455
(4 in stock)
Jonsered 455 Chainsaw Top Handle for Heated Handle
Part: Top handle for heated handle Condition: good used/working condition. Rubber gripping has some nicks, tears Fits: Jonsered 455, 525, 535
jonsered 455, 450, 535, 520sp, 510sp chainsaw oil hose new 504 30 00-33 (J-02)
Part: oil line hose for the pump part # 504300033 Condition: New old stock from closed out dealer. Fits: Jonsereds 455, 450, 535, 510 and 520 sp
(1 in stock)
jonsered 455, 450, 535, 520sp, 510sp chainsaw oil pickup 504 71 00-03 new (J-01)
Part: oil pickup filter for the pump part # 504 71 00-03 Condition: new old stock from closed out dealer. Fits: Jonsereds 455, 450, 535, 510 and 520 sp
jonsered 455, 450, 535, 520sp, 510sp chainsaw oil pickup hose
Part: oil line / hose with pickup filter for the pump part # 504 30 00-33, 504 71 00-03 Condition: good used/working shape Fits: Jonsereds 455, 450, 535, 510 and 520 sp
jonsered 455, 525, 535 chainsaw starter recoil cover and shroud only
Part: starter housing cover and shroud Part # 503 12 38-02 Condition: good used/working order Fits: Jonsereds 455, 525, 535
Jonsered 49 SP 51 52 521 Chainsaw Rear Trigger Handle
Part: Rear Trigger Handle Condition: Good used/ working condition Fits: Jonsered 49 SP, 51, 52, 521
Jonsered 49 sp piston rings (j-002)
PART: Piston Ring, 504 41 10 06 Condition: NEW, OEM, from closed out dealership Fits: 49sp and more
(1 in stock)
Jonsered 490 chainsaw bar tensioner screw pn 505 23 09-02 new (box B)
Part: bar /chain tensioner screw Part # 505 23 09 02 Condition: new old stock part. Dusty/dirty from years of sitting in storage Fits : Jonsered 490. Also fits some Husqvarna models Locatio...
(1 in stock)
jonsered 490 chainsaw crankshaft and rod
Part: crank shaft and connecting rod Part # 503 11 21-01 Condition: good used/working shape Fits: Jonsered 490
jonsered 490 chainsaw flywheel and starter pawl assembly
Part: flywheel with starter pawl/spring/stud set Part # 506 03 13-01 Condition: good used/working shape Fits: Jonsereds 490 590
Jonsered 490 Chainsaw Fuel Cap 504 70 20-03 (bin c)
Fuel/gas cap and o-ring. 504702003 superseded to 503 12 50-02 new old stock from closed out dealer Fits Jonsereds models: 490 590
(1 in stock)
jonsered 490 chainsaw handle bolt and washers
Part: washers and bolt for the handle bar Condition: good used/working shape Fits: Jonsered 490
Jonsered 490 chainsaw oil cap
Oil filler cap. Jonsereds part number 504 70 20-04 In good used shape. May vary cosmetically. Fits Jonsered 490 and 590
(1 in stock)
Jonsered 490 chainsaw oil cap new 503 12 54-02 (D1001)
Oil filler cap. Jonsereds part number 503125402 supersedes 504 70 20-04 New old stock from closed out dealer. Fits Jonsered 490 and 590
(3 in stock)
jonsered 490 chainsaw rear trigger handle assembly
Part: rear trigger handle - includes both cast handle halves, the throttle trigger, safety interlock lever Part # 505 3413-10, 505 27 92-02, 505 27 92-30 Condition: good used/working shape Fits: Jonsered 490
(1 in stock)
jonsered 490 chainsaw rear trigger handle kit
Part: rear trigger handle - includes both cast handle halves, the throttle trigger, safety interlock lever Part # 505 3413-10, 505 27 92-02, 505 27 92-30 Condition: good used/working shape Fits: Jonsered 490 590
jonsered 490 chainsaw top cover screw
Part: top cover screw Part # 503 22 70-01 Condition: good used/working order Fits: Jonsereds 490
Jonsered 490 Complete Clutch Assembly Rim-Drum
Part: clutch assembly - includes the sprocket drum, bearing, mechanism (shoes, springs, carrier) and a new, replacement rim Part # 505 30 32-77, 505 30 36-52, 505 30 23-55, 503 50 32-01 Condition: good used/working shape Fits: Jonsered 490
Jonsered 490 Muffler Bracket (j03)
PART: BRACKET SUPPORT PART # 505 35 04-72 CONDITION: NEW OEM, from closed out dealership FITS: JONSEREDS 490 AND 590
jonsered 490, 590 & Partner 500, 5000 chainsaw starter rewind spring pn 505 29 51-26 new (box E)
Part: starter rewind spring Part # 505 29 51 26 Condition: NEW, aftermarket part Fits: Partner 500 & 5000 & Jonsered 490, 590 Location: Box E
jonsered 490, 590 chainsaw air filter cover
Part: air filter cover with nut set Part # 503 12 69-01 and 503 22 70-01 Condition: good used/working shape Fits: Jonsereds 490, 590
jonsered 490, 590 chainsaw brake arm lever
Part: brake arm lever for the chainbrake Part # 503 10 09-01 Condition: good used/ working order Fits: Jonsered 490, 590
jonsered 490, 590 chainsaw carb intake base mount
Part: carburetor base mount. PN 503 15 08-01 Condition: good used/working shape. Fits: Jonsered 490, 590
jonsered 490, 590 chainsaw carb support bracket
Part: carburetor support bracket Condition: good used/working shape Fits: Jonsered 490, 590
jonsered 490, 590 chainsaw chain catcher stop
Part: chain catcher Part # 506 05 56-01 Condition: good used/working order Fits: Jonsereds 490, 590
jonsered 490, 590 chainsaw chain tensioner adjuster
Part: tensioning screw with adjusing nut/pin Part # 505 23 09-02 Condition: good used/working order Fits: Jonsered 490 and 590
jonsered 490, 590 chainsaw clutch cover
Part: clutch sprocket cover. PN 504 59 00-16 Condition: good used/working shape. Has some minor chipping. Fits: Jonsereds 490, 590
jonsered 490, 590 chainsaw clutch mechanism spring
Part: (1) clutch spring Condition: good used/working shape Fits: Jonsered 490, 590
(1 in stock)
jonsered 490, 590 chainsaw clutch shoe
Part: clutch shoe Condition: good used/working shape Fits: Jonsered 490, 590
(1 in stock)
jonsered 490, 590 chainsaw complete muffler assembly with bolts, bracket, screen (for NON heated handles)
Part: muffler with bolts / screws, front bracket plate, nuts, exhaust gasket, may not include screen Part # 505 35 04-35 - 505 27 21-22, 503 22 20-01, 505 35 04-72 Condition: good used/working shape Fits: Jonsered 490, 590
jonsered 490, 590 chainsaw flywheel cover shroud
Part: flywheel cover shroud. Part # 503 12 47-01 Condition: good used/working shape Fits: Jonsereds 490 & 590
(3 in stock)
jonsered 490, 590 chainsaw flywheel cover shroud 5031247 new (j-02)
Part: flywheel cover shroud. Part # 503 12 47-01 Condition: new old stock from closed out dealer. Dusty from years of storage. Fits: Jonsereds 490 & 590
(2 in stock)
jonsered 490, 590 chainsaw guide bar plate (inner, type 2)
Part: guide bar plate Part # 505 26 93-07 Condition: good used/working shape Fits: Jonsered 490, 590
jonsered 490, 590 chainsaw hand guard and brake band kit for the chainbrake
Part: hand guard handle with brake band/spring/levers Part #s 503 10 09-01, 505 26 93-04, 505 26 93-00, 505 30 38-36, 505 29 31-68 Condition: good used/working shape Fits: Jonsereds 490, 590
jonsered 490, 590 chainsaw handle hardware part # 505 27 92-11
Part: handle hardware part Part # 505 27 92 11 Condition: good used/working shape Fits: Jonsered 490, 590
(1 in stock)
jonsered 490, 590 chainsaw handle hardware part # 505 27 92-11 new (j-4)
Part: handle hardware part Part # 505 27 92 11 Condition: New old stock from closed out dealer. Fits: Jonsered 490, 590
(1 in stock)
Jonsered 490, 590 chainsaw ignition coil
Part: ignition coil Part # 506 02 72-01 Condition: good used/working shape. Tested and works with strong spark Fits: Jonsered 490, 590, Husqvarna 50
jonsered 490, 590 chainsaw inner guide bar plate (inner, type 1)
Part: inner guide plate / oil pump cover Condition: good used/working shape Fits: Jonsered 490, 590
(4 in stock)
jonsered 490, 590 chainsaw intake sleeve boot
Part: intake sleeve boot (fits onto the carb adaptor) Condition: good used/working shape Fits: Jonsered 490, 590
jonsered 490, 590 chainsaw large lot of assorted hardware #1
Part: lot of misc. hardware - screws, bolts, nuts, washers (includes everything pictured) Condition: good used/working shape Fits: Jonsered 490, 590
(1 in stock)
jonsered 490, 590 chainsaw left rear trigger handle half
Part: left rear trigger handle half Condition: good used/working shape Fits: Jonsered 490, 590
jonsered 490, 590 chainsaw muffler assembly 504 35 04-35 new oem (N-005)
muffler with bracket and screen Jonsereds part # 504350435/ 504-350435 New old stock part from closed out dealer Fits Jonsereds 490, 590 models
Jonsered 490, 590 chainsaw muffler assembly 504 35 04-35 new oem (N-005)
muffler Jonsereds part # 504350435/ 504-350435 New old stock part from closed out dealer Fits Jonsereds 490, 590 models
(1 in stock)
jonsered 490, 590 chainsaw muffler bolt and nut set
Part: set of screw/bolts and nuts for the muffler Part # 503 21 82-01 and 503 22 20-01 Condition: good used/working shape Fits: Jonsered 490, 590 Husqvarna 50
jonsered 490, 590 chainsaw muffler for heated handles
Part: muffler for saws with heated handles with bracket support Part # 505 35 04-72 (bracket) Condition: good used/working order Fits: Jonsereds 490 and 590
(1 in stock)
jonsered 490, 590 chainsaw muffler only
Part: muffler Condition: good used/working shape Fits: Jonsered 490, 590
(1 in stock)
jonsered 490, 590 chainsaw oil stop plate
Part: oil plate Part # 503 11 65-01 Condition: good used/working shape Fits: Jonsered 490, 590
jonsered 490, 590 chainsaw outer guide bar plate pn 505 26 92-95 (490 bin)
Part: outer guide bar plate Part# 505 26 92 95 Condition: good used/working order Fits: Jonsered 490, 590 and partner 500, 5000 plus +
jonsered 490, 590 chainsaw small lot of screws #2
Part: small lot of hardware-includes screws and nuts pictured Condition: good used/working shape Fits: Jonsered 490, 590
jonsered 490, 590 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley and rewind spring Part # 504 60 01-19, 505 30 37-35, 505 29 51-26 Condition: good used/working order has two broken grills Fits: Jonsereds 490 and 590
jonsered 490, 590 chainsaw starter recoil cover and pulley assembly #1
Part: starter housing cover with pulley, grip and rewind spring Part # 504 60 01-19, 505 30 37-35, 505 29 51-26 Condition: good used/working order has two broken grills Fits: Jonsereds 490 and 590
(1 in stock)
jonsered 490, 590 chainsaw top cover engine shroud #2
Part:top cover engine shroud Condition: piece of plastic in middle of cover is broken off on side pictured but is still in good usable shape Fits:Jonsered 490, 590
jonsered 490, 590 chainsaw top wrap handle bar
Part: top handlebar. PN 503 10 14-01 Condition: good used/working shape Fits: Jonsered 490, 590
jonsered 490, 590 chainsaw top wrap handle bar type 2
Part: top handlebar. Condition: good used/working shape Fits: Jonsered 490, 590
(2 in stock)
jonsered 490, 590 chainsaw walbro carburetor
Part: walbro carburetor. Part # 505 31 67-51 Condition: good used physical shape. May need a carb rebuild kit Fits: Jonsereds 490, 590
jonsered 490, 590, 450, 510sp chainsaw bar stud pn 505 22 09-37 new (box U)
Part: bar bolt / stud Part # 505 22 09 37 Condition: new old stock part. Dusty/dirty from years of sitting in storage Fits : Jonsered 490, 590, 510 sp, 450 Location: Box U
jonsered 490, 590, 510sp, 450 chainsaw bar bolt set
Part: set of bar bolts / studs Part # 505 22 09-37 Condition: good used/working shape Fits: Jonsered 490, 590, 510 sp, 450, 535
Jonsered 49sp 50 51 52 chainsaw clutch cover
Part: clutch bar cover. Red or red and silver in color. Part number 504 59 00-03 Condition: good used/working shape Fits: Jonsered 49 sp, 50, 51, 52, 52E, 52 E, 521, 521E, 521EV, 49 sp
(2 in stock)
jonsered 49sp 50, 51, 52, 521 chainsaw clutch carrier rotor
Part: clutch carrier/spider Condition: good used/working shape Fits: Jonsered 49 sp, 50, 51, 52, 521
jonsered 49sp chainsaw complete clutch spur sprocket assembly
Part: complete clutch assembly, includes the spur sprocket drum, mechanism (shoes, spring, carrier rotor) washers, race and nut Part # 504 54 03-01 (mechanism) Condition: good used/working shape Fits: Jonsereds 49 sp, may also fit 50, 51, 52, 52e
jonsered 49sp chainsaw condenser 504 39 19-02 new oem (D803)
Condenser part # 504-391902 new old stock part from closed out dealer fits Jonsereds 49 sp chainsaws
(2 in stock)
jonsered 49sp chainsaw crankcase tank chassis housing half - right, clutch side
Part: right, clutch side of the crank case tank chassis housing. Includes the bar studs and nuts Part # 504 44 00-10 and 504 02 49-02 Condition: good used/working shape Fits: Jonsereds 49 sp
(2 in stock)
jonsered 49sp chainsaw crankcase tank housing chassis half - left, flywheel side
Part: left flywheel side of the crank case tank chassis housing Part # 504 44 00-17 Condition: good used/working shape. Some minor oxidation/pitting Fits: Jonsereds 49 sp
(1 in stock)
Jonsered 49sp chainsaw crankshaft
Crank with rod. Crankshaft, Jonsereds part number 504 40 00-03, 504 40 00 03, 504 400003 In good used shape Fits Jonsered 49sp, 49 sp
jonsered 49sp chainsaw cylinder
Condition: good used/working order Fits: Jonsereds 49 sp
jonsered 49sp chainsaw electronic chip
Part: electronic chip to replace points and condenser Condition: good used/working shape Fits: Jonsered 49 sp
(2 in stock)
jonsered 49sp chainsaw flywheel key
Part: key for the flywheel 735 80 15-00, 735801500 Condition: good used/working shape Fits:Jonsereds 49 sp, 50 52e 51 52 521ev 621 70e 66e 801 80 90
jonsered 49sp chainsaw fuel tank vent line and plug
Part: tank vent plug, valve fitting and line Condition: good used/working order Fits: Jonsereds 49 sp and some other models
jonsered 49sp chainsaw ignition coil
Part: ignition coil Part # 504 39 17-01 Condition: good used/working shape. Tested and works with strong spark. Fits: Jonsereds 49 sp
jonsered 49sp chainsaw piston & cylinder kit
Part: piston and cylinder head with intake manifold Condition: good used/working order Fits: Jonsereds 49 sp
jonsered 49sp chainsaw piston and cylinder set new oem 504 42 00-10 (j-5)
piston and cylinder set part # 504420010, 504-420010 new old stock part from closed out dealer Fits Jonsered 49 sp
jonsered 49sp chainsaw piston kit 504 41 00-06 new oem (A-1101)
Piston kit, 44mm - includes ring, wrist pin, circlips Part # 504410006 / 504-410006 new old stock part from closed out dealer Fits Jonsereds 49 sp
jonsered 49sp chainsaw points and condenser set
Part: points and condenser with housing for the ignition Part # 504 62 27-02, 504 38 10-03, 504 38 10-01, 504 38 17-13, 504 39 19-02, 504 38 38-01 Condition: good used/working shape. Tested and works Fits: Jonsereds 49 sp
(4 in stock)
jonsered 49sp chainsaw red air filter cover
Part: air filter cover. PN 504 60 20 94 Condition: good used/working shape Fits: Jonsered 49 sp
jonsered 49sp chainsaw wrist pin bearing new 504 23 34-04 (j-02)
Part: wrist pin bearing Part # 504233404 Condition: new from old closed out dealer stock Fits: Jonsered 49 sp
jonsered 49sp chainsaw wrist pin, bearing and clips for the piston
Part: wrist pin, bearing, clip set Part # 504 14 12-01, 504 41 20-15 Condition: good used/working order Fits: Jonsered 49 sp
Jonsered 49sp handle housing (j03)
PART: REAR HANDLE BOTTOM HOUSING PART #S 504 65 57-04 CONDITION: NEW OEM, from closed out dealership FITS: JONSERED 49 SP, 50, 51, 52, 52E
(1 in stock)
jonsered 49sp to 52 series chainsaw handle bracket screw
Part: screw for the handle bracket Condition: good used/working shape Fits: Jonsereds 49 sp, 50, 51, 52
jonsered 49sp to 52 series chainsaw throttle rod and hardware kit
Part: throttle rod link and hardware pictured Part # 504 84 14-01504 38 67-00 + Condition: good used/working shape Fits: Jonsered 49 sp, 50, 51, 52, 52e
Jonsered 49SP to 52 series Starter recoil cover only
Part: starter housing cover only Condition: good used/working shape. Faded. Fits: Jonsered 49 sp, 50, 51, 52, 52e
jonsered 49sp to 521 chainsaw fuel cap #2 (without gasket)
Part: fuel gas cap only, does Not include the gasket. Part # 504 70 26-00 Condition: good used/working shape Fits: Jonsered 49 sp, 50, 51, 52, 52e, 521, 521e
jonsered 49sp to 521 chainsaw switch plate & nut
Part: off switch plates and nut Condition: good used/working shape Fits: Jonsered 49sp, 50, 51, 52, 52e, 521
jonsered 49sp to 521 series chainsaw air filter NEW 504 35 71-01 (H-58)
Part: air filter. Part # 504357101 Condition: New old stock OEM part Fits: Jonsered 49 sp, 50, 51, 52, 52e, 521
jonsered 49sp to 521 series chainsaw gas / fuel cap with keeper chain
Part: fuel cap with keeper and gasket. Part # 504 70 26-00 Condition: good used/working shape Fits: Jonsered 49 sp, 50, 51, 52, 52e, 521e, 621, 70e
(1 in stock)
jonsered 49sp to 521 series chainsaw handle collar plate pn 504 06 53-05 used
Part: handle collar plate Part # 504 06 53 05 Condition: good used/working shape Fits: Jonsered 49 sp, 50, 51, 52, 52e, 521, 70e, 621
jonsered 49sp to 521 series chainsaw hardware for the flywheel - pawl, spring, clip set
Part: set of 2 starter pawls, springs and clips Part # 504 64 56-00, 504 21 73-01, 735 61 60-40, 504 04 24-00 Condition: good used/working shape Fits: Jonsered 49sp, 50, 51, 52, 52e, 521 621 and some other models
jonsered 49sp to 521 series chainsaw muffler gasket
Part: muffler exhaust gasket Part # 504 13 02-01 Condition: good used/working shape Fits: Jonsereds 49 sp, 50, 51, 52, 52e, 521