We offer FREE SHIPPING on all orders over $100 within the USA

SEARCH FOR PARTS

Craftsman

We have used craftsman chainsaw parts for most makes and models. 917. denotes Roper built craftsman chainsaws, 358. denotes poulan built chainsaws. We have lots of used chainsaw parts for different models of craftsman 3.7 chainsaws

Ready to ship
(1 in stock)

poulan xxv 25DA, older Craftsman 2.1, 2.3 chainsaw fuel cap

  Part: fuel/gas cap 10123 Condition: good used/working shape Fits:  Poulan XXV 25 DA and old Craftsman 2.1 and 2.3

View
$19.95
Sold Out!

poulan 25da xxv and craftsman 2.1 chainsaw guide bar plate (25da bin)

  Part: bar plate Part # 23455, 23864, 530-023864, 530023864 Condition: good used/working shape Fits: Poulan 25 DA xxv and Craftsman 2.1

View
$5.00
Sold Out!

Craftsman 2.0 chainsaw gas tank

  Fuel tank.  Part number 23819, 530-023819, 53023819   In good used shape   Fits poulan built craftsman 2.0 cid chainsaws 10" 12" etc.

View
$14.99
Sold Out!

poulan built craftsman 14" chainsaw clutch cover part # 530-037803

  Part: clutch/bar clamp cover with nuts and chain tensioner assembly.  Part # 530037803 Condition: good used/working shape Fits: Poulan built Craftsman 14" chainsaws  

View
$15.00
Sold Out!

poulan built craftsman 2.8, 3.0 chainsaw starter cover and pulley assembly

  Part: starter / recoil housing cover with spring and pulley Condition: good used/working shape Fits: Poulan built Craftsman 2.8, 3.0, 3.3 and some other models

View
$29.95
Ready to ship
(1 in stock)

poulan built craftsman 2.3, 16" chainsaw starter recoil cover and pulley assembly (red)

  Part: starter housing cover with pulley and rewind spring Condition: good used/working shape.  Fits: Poulan built craftsman 2.3, 16" models

View
$15.00
Sold Out!

roper built craftsman 3.7 chainsaw air filter cover #1

Part: air filter cover 9919R Condition: good used/working shape with no breaks-is faded Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$9.99
Sold Out!

poulan built craftsman 3.7 chainsaw clutch cover

  PART: clutch cover sprocket guard CONDITION: good used/working order , cover may be red or gray FITS: poulan built craftsman 3.7 chainsaws, will fit on Poulan 3400 3700 3800 4000

View
$29.00
Sold Out!

roper built craftsman 3.7 chainsaw ignition coil

Part: ignition coil. Part # 808J Condition: good used shape. Tested and works with strong spark. Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$45.00
Sold Out!

Craftsman 2.0 Chainsaw Air Filter Cover type 1

Part: Air filter/carburetor cover and choke knob Condition: Good used/working condition Fits: Craftsman 2.0

View
$4.95
Sold Out!

poulan built craftsman 3.7 and poulan 3400 to 4000 series chainsaw choke rod and link

  Part: choke rod with linkage Condition: good used/working order Fits: Poulan built craftsman 3.7 models and Poulan 3400, 3700, 3800, 4000 models

View
$8.50
Ready to ship

poulan xxv 25da and craftsman 2.1 bar cover bolt

Part: bar clamp bolt / screw, pn 15183 Condition: good used/working shape Fits: Poulan xxv 25 da and Craftsman 2.1 models

View
$0.95
Sold Out!

craftsman 2.0 14" chainsaw starter recoil cover and pulley assy

  Part: starter housing cover with pulley, spring and grip. Pulley may be either plastic or metal Condition: good used/working shape Fits: Craftsman 2.0, 14"

View
$12.00
Ready to ship
(1 in stock)

roper built craftsman 3.7 chainsaw clutch sprocket assembly

Part: clutch assembly, includes the rim sprocket / drum, the clutch mechanism, the bearing, and washer Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$45.00
Sold Out!

roper built craftsman 3.7 chainsaw throttle trigger lever #2

Part: throttle trigger lever. PN 9118H1 Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models

View
$9.95
Sold Out!

Craftsman 2.3 Chainsaw Fuel / gas Tank

Part: Fuel tank Condition: Good used/working condition with no breaks or leaks Fits: Craftsman 2.3

View
$9.95
Sold Out!

Poulan 3400-4000 Craftsman 3.7 Chainsaw Throttle trigger kit

    Throttle trigger and safety kit. Includes: Throttle Lock # 24357, Throttle lock bushing # 32053, Trigger lock spring #25469, Trigger bushing #32059, Throttle trigger #25468, Throttle lock spring #24378.   In good used shape   Fits Poulan 3400 3700 3800 4000 and Craftsman 358.xxx 3.4 ci and ...

View
$15.00
Sold Out!

poulan built craftsman 3.7 chainsaw rear trigger handle assembly

  Part: rear handle housing with throttle trigger and safety lever interlock.  May be red or black. Condition: good used/working order Fits: Poulan built Craftsman 3.7, 3.4, 18" 20"

View
$39.95
Sold Out!

poulan built craftsman 3.4, 3.7 chainsaw air filter cover and knob

  Part: air filter / carburetor cover with knob Part # 24482 / 530-024482 Condition: good used/working shape Fits: some Poulan built Craftsman 3.4, 3.7 models

View
$16.99
Sold Out!

craftsman model # 316.350840 55cc chainsaw oil pump assembly

Part: oil pump with worm drive gear MC-9228-3108, MC92283108 Condition: good used/working shape Fits: craftsman model # 316.350840 55cc chainsaws, Mcculloch 4600 4618 4620

View
$29.95
Sold Out!

roper built craftsman 3.7 chainsaw starter pulley and rewind spring set

Part: starter pulley. PN 9171H Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models

View
$24.95
Sold Out!

roper built craftsman 3.7 chainsaw bar chain tensioner type 2

Part: chain tensioning screw and bar adjusting nut Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models

View
$6.50
Ready to ship
(1 in stock)

roper built craftsman 3.7 chainsaw handle bar av buffer mount #3

Part: handle bar av buffer mount Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$6.99
Ready to ship
(2 in stock)

Craftsman 2.0 model # 358.355120 Chainsaw starter recoil cover and pulley assembly

Part: starter/recoil cover and pulley assembly Condition: good used/working shape Fits: Poulan built Craftsman 2.0 chainsaws with model # 358.355120

View
$15.50
Ready to ship
(3 in stock)

roper built craftsman 3.7 chainsaw reed valve assembly

Part: reed valve assembly Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$7.95
Sold Out!

roper built craftsman 3.7 chainsaw air filter cover and filter set

  Part: air filter cover, knob and air filter Part # 9121H, 9166H, 9103H Condition: good usable condition Fits: Craftsman built Roper 3.7 chainsaws with model # 917.351090 and some other model #s

View
$19.95
Sold Out!

poulan built craftsman 3.7 chainsaw starter cover and pulley assembly (Red)

  Part: starter fan housing recoil cover with pulley and rewind spring Condition: good used/working shape Fits: Poulan 3400 built Craftsman 3.7 3.4, 18" 20"

View
$35.00
Sold Out!

craftsman 55cc, model # 316.350840 + chainsaw .325-7 clutch sprocket assembly

Part: .325-7 clutch spur sprocket drum with mechanism and nut Condition: good used/working shape Fits: Craftsman 55cc models with model # 316.350840 and some other models 

View
$29.95
Sold Out!

poulan built craftsman 42cc, 18" model # 358. 350670 chainsaw clutch cover

  Part:clutch sprocket cover Condition: good used/working shape, color may vary Fits: Poulan built 42cc 40cc, 18" Craftsman chainsaws with model # 358.350670

View
$8.00
Sold Out!

roper craftsman 3.7 chainsaw air filter

Part: air filter Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$12.00
Sold Out!

craftsman 1.9 and poulan xx chainsaw tillotson hu22a carburetor

Part: tillotson HU 22A carburetor Condition: good used physical condition-may need a carb rebuild kit Fits: craftsman 1.9 and poulan XX models

View
$15.00
Sold Out!

Craftsman 358.352380 Chainsaw Ignition Coil

  Phelon, solid state electronic ignition coil.  Part number 530-069403, 530069403, 69403   Tested, in good used shape   Fits Poulan and Craftsman 358.352380, 2400

View
$19.95
Ready to ship
(2 in stock)

poulan built craftsman 3.3 chainsaw clutch cover

  Part: clutch cover / bar clamp 530-027154, 027154.  Some are black plastic, and some are grey. Condition: good used/working order Fits: Poulan built Craftsman 3.3, 2.8, 3.0, 3.1 ci models

View
$9.95
Sold Out!

Craftsman 358.352380 chainsaw walbro WT247 carburetor

  WT 247 walbro carb   In good used shape, may or may not need fresh gasket and diaphram kit installed   Fits Poulan Craftsman 358.382380

View
$25.00
Ready to ship
(1 in stock)

roper built craftsman 3.7 chainsaw guide bar plate (early model type)

  Part: inner or outer guide bar plate Condition: good used/working order Fits: early model (older) Roper built craftsman 3.7 models

View
$5.00
Ready to ship

poulan built craftsman 3.7 and poulan 3400 to 4000 series chainsaw carb screw and bracket set

  Part: carburetor bolt / screw set with bracket. PN 15245 and 24349 Condition: good used/working shape Fits:  Poulan 3400, 3700, 3800, 4000  

View
$2.95
Sold Out!

poulan 2050 2150 and craftsman chainsaw carburetor walbro wt324 kit

  Part: walbro wt 324 carburetor Condition: good used physical shape. May need carb rebuild kit Fits: some Poulan and Craftsman chainsaw models

View
$15.00
Sold Out!

craftsman 2.0, 2.1, 2.3 and poulan micro xxv chainsaw starter pulley (micro bin)

Part: starter pulley spool in good used/working shape. Fits: Craftsman 2.0, 2.1, 2.3 and Poulan Micro XXV 1800 2000 2300 models  

View
$8.50
Sold Out!

craftsman 55cc chainsaw starter recoil cover and pulley assembly

  Part: starter housing cover with pulley, rewind spring and grip Condition: good used/working shape Fits: Craftsman 55 cc incredi-pull

View
$39.95
Ready to ship
(1 in stock)

poulan built craftsman chainsaw red clutch cover and brake handle

Part: clutch cover and brake guard for the chainbrake.  Condition: good used/working shape Fits: many models of Poulan built Craftsman chainsaws.

View
$15.00
Sold Out!

roper built craftsman 3.7 chainsaw throttle link #1

Part: throttle link Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$4.99
Ready to ship
(1 in stock)

roper built craftsman 3.7 chainsaw fuel cap (late model)

Part: fuel / gas cap Condition: good used/working shape Fits: many models of Roper built Craftsman 3.7 chainsaws

View
$5.99
Sold Out!

craftsman 3.7 chainsaw fuel / gas tank

Part: fuel tank Condition: good used/working shape with no breaks or leaks Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$14.50
Sold Out!

Poulan Craftsman 3.7 Chainsaw Hand Guard Handle

Part: hand guard Condition: good used/working shape-no breaks Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080. Also fits some Poulan 3400-4000 series chainsaws.

View
$5.50
Sold Out!

Craftsman 18" 40cc Chainsaw Sim-Pul Starter assembly

  Starter recoil rewind starter assembly with cover, pulley, cog and springs.  Built with Sim-Pul ton technology.   In good used shape   Fits many Poulan built Craftsman chainsaws

View
$22.22
Sold Out!

Craftsman Roper 3.7 Chainsaw Ignition Coil 9326R

  Solid state ignitioin group.  Roper part number 9326R   Tested, in good used shape   Fits Craftsman Roper 3.7.   917....model numbers

View
$59.95
Sold Out!

craftsman 16", 36cc chainsaw complete starter recoil cover and pulley assembly

  Part: starter housing cover with pulley, rewind spring, grip Condition: good used/working order Fits: Craftsman 16in., 36cc and some other models

View
$15.00
Sold Out!

craftsman 55cc, model # 316.350480 chainsaw top wrap handle bar

  Part: handlebar Part # mc-9228-31b202 Condition: good used/working order Fits: Craftsman 55cc model # 316.350480, Mcculloch MS1846av, MS 1846av, MS1846 AV, 1846 may also fit other models

View
$9.99
Sold Out!

craftsman 55cc, model # 316.350480 chainsaw walbro wt-769 carburetor with boot

  Part: walbro wt769 carburetor with boot Condition: good used physical shape, may need a carb rebuild kit Fits: Craftsman 55cc model # 316.350480, may also fit other models

View
$25.00
Sold Out!

poulan 2700, 2800, 3000 and craftsman 3.0, 2.8, 3.1 chainsaw bucking spike and screws

  Part: spike with screws Condition: good used/working order Fits: Poulan 2700, 2800, 3000 and craftsman 2.8, 3.0, 3.1

View
$7.50
Sold Out!

craftsman 2.0 chainsaw chain tensioner adjuster

  Part: chain adjust screw, nut and pin. Condition: good used/working shape Fits:  Craftsman 2.0 chainsaw with models #s 358.352050, 358.352010 and others.

View
$4.50
Sold Out!

poulan built craftsman 16" to 18" chainsaw clutch cover #1

Part: clutch bar clamp cover. Cover only. Part # 530-049217   Condition: good used/working shape   Fits: some models of Poulan built Craftsman 16" to 18" chainsaws  

View
$9.95
Ready to ship
(2 in stock)

roper built craftsman 3.7 chainsaw bar plates set (for late models)

Part: set of plates, inner plate & outer plate Condition: good used/working order Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. Late / new models. 

View
$9.50
Sold Out!

craftsman 42cc, 18"/20" chainsaw hand guard

Part: hand guard / brake handle Condition: good used/working shape Fits: Craftsman 42cc, 20" & 18" chainsaw

View
$8.00
Sold Out!

Roper Built Craftsman 3.7 Air Filter Cover #2

Part: Air filter #2 Condition: Good used/working shape Fits: Roper built Craftsman 3.7 w/ model # 917.353760

View
$14.00
Ready to ship

Poulan Built Craftsman 3.7 Top Cover (black)

Part: Top cover / cylinder shroud. PN 25555 24227 Condition: Good used/working shape. Has some fading. Fits: Poulan built Craftsman 3.7 with model # 358.354830 and others

View
$7.00
Sold Out!

Craftsman 2.0 Chainsaw Oil Cap #1

Part: oil cap Condition: Good used/working condition Fits: Craftsman 2.0, 10"/12"/14" with model #s 358.352050, 358.352010 and others

View
$5.99
Sold Out!

craftsman 3.7 chainsaw decompression valve

Part: decompression valve Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$4.95
Sold Out!

craftsman 3.7 chainsaw ignition off switch and wire

Part: ignition off switch and wire Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$6.95
Ready to ship

roper built craftsman 3.7 chainsaw hand guard handle

Part: hand guard Condition: good used/working shape with no breaks-has some paint loss Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$12.95
Ready to ship
(1 in stock)

Poulan Craftsman 3.7 Chainsaw Handle Bracket Brace

Part: handle bracket brace. PN 11865 Condition: good used/working shape Fits:Craftsman 3.7 chainsaws with model #358.356080 and others. Also fits some Poulan 3400-4000 sereies chainsaws.

View
$5.50
Ready to ship
(4 in stock)

Craftsman 2.0 10", 12" & 14" Chainsaw Clutch Side Cover Case #1

clutch cover side case only-no other parts included good used shape with no breaks Fits the Following Models: Craftsman 2.0 12”, Craftsman 2.0 14"

View
$7.50
Sold Out!

Poulan built craftsman 3.7 chainsaw starter cover and pulley assembly (Grey)

  Part: starter fan housing recoil cover with pulley and rewind spring Condition: good used/working shape Fits: Poulan 3400 built Craftsman 3.7 3.4, 18" 20"

View
$35.00
Sold Out!

Craftsman Roper 3.7 Chainsaw Points Type Ignition

  Points type ignition complete.  Includes coil, points, condenser, wiring and mounting unit.   Tested, in good used shape   Fits older Craftsman 917. model series 3.7 cid roper built chainsaws with points type ignition

View
$45.00
Sold Out!

roper built craftsman 3.7 chainsaw manual oiler (early model / old style)

  Part: manual oil pump oiler plunger Condition: good used/working order Fits: Roper built Craftsman 3.7 early model / old style chainsaws

View
$10.00
Sold Out!

roper built craftsman 3.7 chainsaw muffler assembly

Part: muffler Condition: good used/working order Fits: Roper built Craftsman 3.7 chainsaw models

View
$29.95
Ready to ship
(1 in stock)

roper built craftsman 3.7 chainsaw tillotson hs 200a carburetor and bolts

  Part: tillotson hs-200a, hs200a carburetor with bolts Condition: good used physical shape, may need a carb rebuild kit Fits: some models of Roper built Craftsman 3.7 models 917.353770 and others

View
$20.00
Ready to ship
(1 in stock)

craftsman 55cc model # 316.350480 chainsaw complete chainbrake assembly

  Part: complete chainbrake, includes the clutch cover, hand guard, brake band, spring, mechanism, cover, spike, chain catcher Condition: good used/working order Fits: Craftsman 55cc, model # 316.350480

View
$45.00
Sold Out!

Craftsman 358.352380 chainsaw rear handle tank assembly

  Rear handle tank assembly with cap, trigger parts, and throttle cable 530-014760     In good used shape   Fits Poulan and Craftsman chainsaws.

View
$25.00
Ready to ship
(2 in stock)

poulan built craftsman 3.7 and poulan 3400 to 4000 series chainsaw starter rewind spring, disc and baffle kit

  Part: starter rewind spring with disc and air baffle cover Part # 24232, 42051, 42054 Condition: good used/working order Fits: Poulan built craftsman 3.7 and Poulan 3400, 3700, 3800, 4000

View
$13.00
Sold Out!

craftsman 55cc, model # 316.350480 chainsaw muffler assembly

  Part: muffler kit - includes the bolts, nuts, and plate Condition: good used/working order Fits: Craftsman 55cc model # 316.350480, Mcculloch ms1846av, MS 1846av, MS1846 AV, 1846 may also fit other models

View
$19.99
Sold Out!

craftsman 55cc, model # 316.350480 chainsaw intake manifold rubber boot kit

  Part: intake manifold / carburetor boot kit Condition: good used/working order Fits: MTD Mcculloch Craftsman 55cc 46cc model # 316.350480, 4600, MS1846av, may also fit other models

View
$9.95
Sold Out!

poulan built craftsman 3.7 chainsaw flywheel and starter pawl assembly

  Part: flywheel with starter pawls, spring, studs Condition: good used/working order Fits: Poulan built Craftsman 3.7 models

View
$19.95
Sold Out!

poulan built craftsman model # 358.356240 chainsaw ignition coil

  Part: phelon ignition coil Part # 530-039143 Condition: good used/working order. Tested and works with strong spark. Fits: Poulan built Craftsman model # 358.356240 chainsaw and some other models

View
$15.99
Sold Out!

poulan built craftsman 2.0 chainsaw lot of assorted hardware

Part: lot of misc. hardware - screws / bolts (includes everything pictured) Condition: good used/working shape Fits: Poulan built craftsman 2.0 chainsaws (poulan micro xxv equivalent)  

View
$3.99
Ready to ship

poulan built craftsman model # 358.355061 chainsaw clutch cover with guard

  Part: clutch cover/ bar clamp with guard shield - part #s 530-012131 and 530-025529 Condition: good used/working shape. Fits: poulan built craftsman chainsaws with model # 358.355061. 2.3 16", 358.355140

View
$12.99
Ready to ship
(3 in stock)

roper built craftsman 3.7 chainsaw red, early model starter recoil cover and pulley assembly

Part: starter housing cover with pulley and rewind spring. Condition: good used/working shape Fits: Old style (early model) Roper built craftsman 3.7 chainsaws with model #s 917.353760 & 917.35761. May also fit other models

View
$29.99
Sold Out!

poulan built craftsman 42cc, 18" model # 358.350670 chainsaw filter base and switch

  Part: filter mount base (PN 530-057892) & stop switch (PN 530-057891) Condition: good used/working shape Fits: Poulan built Craftsman 42cc,18" model # 358.350670

View
$7.00
Ready to ship
(1 in stock)

craftsman 33cc, 14", 2.0cid chainsaw starter recoil cover and pulley assembly

Part: starter housing cover (PN 530-049336) with pulley (PN 530-037817), and spring  Condition: good used/working shape Fits: Craftsman 14",  2.0 cubic inches, 33cc chainsaws, 16", 18"

View
$9.95
Sold Out!

roper built craftsman 3.7 chainsaw bar nut set

  Part:set of 2 bar nuts   Condition: good used/working shape   Fits: Old style. Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models

View
$4.50
Sold Out!

poulan built craftsman 3.7 chainsaw walbro HDB8B carburetor #3

   Part:HDB 8B chainsaw Walbro carburetor   Condition: good used physical shape. May need a carb rebuild kit.   Fits: Poulan built Craftsman 3.7, 3.4, Poulan 3400 3700 3800 4000

View
$29.99
Sold Out!

roper built craftsman 3.7 chainsaw oil pump diaphragm

Part: oil pump plunger diaphragm Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$12.95
Sold Out!

roper built craftsman 3.7 chainsaw starter rewind spring

Part: rewind coil spring. PN 9117H Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760. May also fit other models

View
$5.00
Ready to ship
(1 in stock)

roper built craftsman 3.7 chainsaw oil cap (late model)

Part: oil cap Condition: good used/working shape Fits: many models of Roper built Craftsman 3.7 chainsaws

View
$3.99
Sold Out!

Roper Built Craftsman 3.7 chainsaw oil lever

Part: oil oiler lever button Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$4.99
Ready to ship
(1 in stock)

craftsman 2.0 chainsaw muffler

Part: muffler Condition: Good used/working condition Fits: Craftsman 2.0, 10"/12"/14" with model #s 358.352050, 358.352010 and others

View
$7.50
Sold Out!

poulan craftsman 3.7 chainsaw starter cover air baffle

Part: starter cover shield / air baffle. PN 24232 Condition: good used/working shape Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080. Also fits some Poulan 3400-4000 series chainsaws.

View
$4.00
Ready to ship

roper built craftsman 3.7 chainsaw late, red model starter / recoil cover and pulley assembly

Part: starter cover with the pulley and spring Condition: good used/working shape with no breaks-some paint loss Fits: late model (newer) Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$25.00
Sold Out!

craftsman 3.7 chainsaw idle adjustment screw

Part: idle adjustment screw Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.

View
$3.50
Ready to ship
(1 in stock)

Poulan Craftsman 3.7 Chainsaw Intake Manifold

Part: Intake manifold Condition: good used/working shape Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080. Also fits some Poulan 3400-4000 series chainsaws.

View
$3.00
Sold Out!

Poulan Craftsman 3.7 Chainsaw Ignition Off Switch & Wire

Part: ignition off switch and wire Condition: good used/working shape Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080. Also fits some Poulan 3400-4000 series chainsaws.

View
$4.00
Sold Out!

Poulan Craftsman 3.7 Chainsaw Fuel/Gas Cap

Part: fuel cap Condition: good used/working shape Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080.

View
$4.99
Sold Out!

Poulan Craftsman 3.7 Chainsaw Bar Plate

Part: bar plate Condition: good used/working shape Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080. Also fits some Poulan 3400-4000 sereies chainsaws.

View
$7.00
Ready to ship

Poulan - Craftsman Chainsaw Cylinder AV Mount Spring 530 04 79-34 NEW

 Cylinder AV buffer handle mount spring. 530047934, 530-047934, 530069384, 530-069384, 530071385, 530-071385  NEW  Fits MANY models of Poulan, Poulan Pro, and Craftsman with spring mounted handles.  Poulan 2055, Poulan Pro 260 220, Sears Craftsman 358. series 358.351480

View
$7.95
Ready to ship
(1 in stock)

Craftsman Roper D44 Chainsaw Ignition Coil Kit

 Complete ignition kit includes: coil module, breaker points, condenser, and some wiring. 610706, 610707, 610708  Tested, in good used shape  Fits many 917. series David Bradley, Roper, Craftsman, Sears D-44 series and other with Tecumseh power products engine.

View
$69.95
Sold Out!

craftsman 3.7 chainsaw ignition off switch type #2

Part: ignition off switch throttle lock decompression activation lever  8516R Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws

View
$12.95
Sold Out!

Craftsman 18" 42cc Chainsaw Sim-Pul Starter assembly

  Starter recoil rewind starter assembly with cover, pulley, cog and springs.  Built with Sim-Pul ton technology.   In good used shape   Fits many Poulan built Craftsman chainsaws

View
$22.22
Sold Out!

Roper built craftsman 3.7 chainsaw bar plates set (for early models)

Part: set of plates, inner plate & outer plate Condition: good used/working order Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers

View
$9.50
Sold Out!

Poulan Built Craftsman 2.3ci Piston and Cylinder kit

Part: piston and cylinder kit 530069553, 530-069553, 69553,  530011861, 530-011861, 11861 Condition: came off a saw with good compression. Fits: Craftsman 2.3 Model # 358.355062, 358.357180, Poulan 2300 AV, Poulan 2300av 530069553 530069553 

View
$45.00