We offer FREE SHIPPING on all orders over $100 within the USA

SEARCH FOR PARTS

David Bradley

Sold Out!

David Bradley 360 Chainsaw flywheel

 Phelon Flywheel   In good used shape   Fits David Bradley 360 and others

View
$37.50
Sold Out!

David Bradley 360 Chainsaw Starter Assembly

Starter rewind recoil  pull start assembly complete  Good used / usable  Depending on model direction of pull may need to be reversed by flipping starter spring over. Fits David Bradley 360 and others 

View
$49.95
Ready to ship
(1 in stock)

David Bradley 360 Chainsaw Phelon Ignition

  Complete phelon ignition kit.  Includes: stator, coil, points, condenser and all.   Tested, in good working order   Fits David Bradley 360 and others

View
$79.95
Sold Out!

David Bradley 360 Chainsaw Spark Plug Guard

  Spark plug guard cover part number 9774m   In good used shape   Fits David Bradley 360

View
$9.95
Sold Out!

David Bradley 360 Chainsaw Muffler

 Muffler exhaust casting  In good used shape  Fits David Bradley 360, 917.series

View
$14.95
Ready to ship
(1 in stock)

David Bradley 917. chainsaw herr 3/8"-7t spur sprocket drum new pn n117-a7

  Part: 3/8" pitch x 7T spur sprocket drum for the clutch Herr Part # n117 a7 Condition: new Fits: David Bradley 917... LIGHTWEIGHTS WITH 2-3/4" CLUTCH

View
$12.00
Sold Out!

David Bradley 360 Chainsaw Air Filter Cover

  Air filter cover cap with lock   In good used shape   Fits David Bradley 360 and others

View
$12.50
Sold Out!

David Bradley 360 Chainsaw Piston & Cylinder Assembly

 Short block motor includes: piston with rings and pin, cylinder.   In good used shape  Fits David Bradley 360, 917.60002. Tecumseh Power Products AH47 type 1079B engine.

View
$149.95
Ready to ship
(2 in stock)

David Bradley 360 Chainsaw Starter Cup

 Deeper style starter cup for Fairbanks Morse Starter  In good used shape (bear in mind that these cups were smooth on the inside when new, and are still smooth on the inside when in good used condition)  Fits David Bradley 360 and others

View
$15.00
Sold Out!

David Bradley model # 355.50130 Chainsaw Drive Gear and Bearings

Part: Drive gear and bearings Condition: Good used/working shape Fits: David Bradley model # 355.50130

View
$15.00
Sold Out!

David Bradley model # 355.50130 Chainsaw Sprocket

Part: clutch Sprocket Condition: Good used/working shape Fits: David Bradley with model # 355.50130

View
$20.00
Sold Out!

david bradley model # 355.50130 chainsaw throttle trigger and link

Part: throttle trigger and link Condition: good used/working shape Fits: David Bradley chainsaws with model # 355.50130

View
$9.95
Sold Out!

David Bradley Chainsaw Model ID and Instruction Tag

  Model and instructions tag with screws   In good used shape   Fits many, large, old David Bradley Chainsaws.

View
$9.95
Sold Out!

David Bradley 917.61402 Chainsaw Air Intake Reed Holder

 Carb mount air intake elbow  In good used shape  Fits Sears David Bradley 917.61402

View
$5.00
Ready to ship
(2 in stock)

David Bradley 360 Chainsaw Flywheel Shroud

Part: Flywheel shroud case backing plate Condition: Good used/working shape Fits: David Bradley 360

View
$15.00
Ready to ship
(1 in stock)

David Bradley 360 Chainsaw Flywheel Shroud Cover

Part: Flywheel shroud cover starter base Condition: Good used/working shape Fits: David Bradley 360

View
$15.00
Sold Out!

David Bradley 360 Chainsaw Tillotson Carburetor

 Tillotson HL carb. HL11a, HL 11a  In good used shape, may or may not need fresh gasket and diaphraghm kit installed  Fits David Bradley 360 and others

View
$45.00
Sold Out!

David Bradley 360 Chainsaw HL92a Tillotson Carburetor

 Tillotson HL carb. HL 92a, HL 92 a   In good used shape, may or may not need fresh gasket and diaphraghm kit installed  Fits David Bradley 360 917.61402 and others

View
$45.00
Sold Out!

David Bradley 360 Chainsaw HL Tillotson Carburetor Needle and Seat

 Tillotson HL carb parts  In good used shape  Fits David Bradley 360 917.61402 and others

View
$9.95
Sold Out!

David Bradley Model 917.60003 Chainsaw Air filter kit

Air Filter base pn 9842m , Air Filter pn 9870m, and Air filter Cover  Good Used/ Usable  Sears David Bradley Model 917.60003 

View
$39.95
Sold Out!

David Bradley 917.61402 Chainsaw Reed Valve

 Reed valve with plate. 470114, 470117  In good used shape  Fits Sears David Bradley 917.61402

View
$12.95
Sold Out!

David Bradley 360 Chainsaw Starter Mounting Flange

 Starter recoil rewind assembly mounting flange. 590237  In good used shape   For Fairbanks Morse Starters used on 917. series David Bradley 360 and others

View
$12.95
Sold Out!

David Bradley 360 Chainsaw Reed Assembly

 4 petal reed intake assembly with housing.  In good used shape  Fits David Bradley 360, 917.60003 Chainsaws and others

View
$15.00
Ready to ship
(1 in stock)

David Bradley 355.50130 Chainsaw Clutch/Drive Pinion

Part: Clutch/drive pinion Condition: Good used/working shape Fits: David Bradley 355.50130

View
$32.00
Ready to ship
(1 in stock)

David Bradley 355.50130 Chainsaw Drive Gear Case Cover

Part: Drive gear case/cover Condition: Good used/working shape Fits: David Bradley 355.50130

View
$39.95
Ready to ship
(1 in stock)

David Bradley model # 355.50130 Chainsaw Air Horn Intake

Part: Air horn intake Condition: Good used/working shape Fits: David Bradley, model # 355.50130

View
$7.50
Ready to ship
(1 in stock)

David Bradley model # 355.50130 Chainsaw Bar Clamp

Part: Bar clamp and nuts Condition: Good used/working shape Fits: David Bradley model # 355.50130

View
$6.95
Ready to ship
(1 in stock)

David Bradley model # 355.50130 Chainsaw Bar Studs

Part: Bar Stud / bolt set Condition: Good used/working shape Fits: David Bradley model # 355.50130

View
$6.00
Ready to ship
(1 in stock)

David Bradley model # 355.50130 Chainsaw Bearing Retainer

Part: Bearing retainer Condition: Good used/working shape Fits: David Bradley, model # 355.50130

View
$5.50
Ready to ship
(1 in stock)

David Bradley model # 355.50130 Chainsaw Bucking Spike

Part: Bucking Spike Condition: Good used/working shape. Has small chip Fits: David Bradley model # 355.50130

View
$12.95
Ready to ship
(1 in stock)

david bradley model # 355.50130 chainsaw crankcase with crankshaft

Part: crank case and crank shaft Condition: good used/working shape Fits: David Bradley chainsaws with model # 355.50130

View
$50.00
Ready to ship
(1 in stock)

David Bradley model # 355.50130 Chainsaw Flywheel Magneto/Hub

Part: Flywheel Magneto/Hub Condition: Good used/working shape Fits: David Bradley with model # 355.50130

View
$49.95
Ready to ship
(1 in stock)

David Bradley model # 355.50130 Chainsaw Flywheel Shroud

Part: Flywheel shroud cover Condition: Good used/working shape Fits: David Bradley, model # 355.50130

View
$15.00
Ready to ship
(1 in stock)

david bradley model # 355.50130 chainsaw fuel/gas tank

Part: fuel tank Condition: good used/working shape with no leaks Fits: David Bradley chainsaws with model # 355.50130

View
$39.95
Ready to ship
(1 in stock)

David Bradley model # 355.50130 Chainsaw Ignition Off Switch

Part: Off switch Condition: Good used/working shape Fits: David Bradley, model # 355.50130

View
$7.95
Ready to ship
(1 in stock)

David Bradley model # 355.50130 Chainsaw Oil Cap

Part: Oil Cap Condition: Good used/working shape Fits: David Bradley model # 355.50130 chainsaws

View
$8.00
Ready to ship
(1 in stock)

David Bradley model # 355.50130 Chainsaw Points Cam

Part: Points cam Condition: Good used/working shape Fits: David Bradley, model # 355.50130

View
$6.95
Ready to ship
(1 in stock)

david bradley model # 355.50130 chainsaw points ignition coil

Part: points ignition coil Condition: good used shape-tested and works Fits: David Bradley chainsaws with model # 355.50130

View
$150.00
Ready to ship
(1 in stock)

david bradley model # 355.50130 chainsaw top handle bar

Part: top handle bar Condition: good used/working shape Fits: David Bradley chainsaws with model # 355.50130

View
$19.95
Ready to ship
(1 in stock)

david bradley .325-7 windsor clutch spur sprocket drum

  Part: windsor .325x7 clutch spur sprocket drum Part # DB 137 A7 Condition: good used/working order- shows no wear on the teeth Fits: some models of David Bradley chainsaw

View
$15.99
Ready to ship

sears david bradley herr 3/8-7 spur sprocket drum and bearing new pn n116-a7

  Part: 3/8" pitch x 7T spur sprocket drum for the clutch Herr Part # n116 a7 Condition: new Fits: some models of Sears David Bradley 917-350710, 917-350711, 917-351050, lightweight 917

View
$13.99
Ready to ship
(1 in stock)

David Bradley 360 Chainsaw complete clutch assembly

  Complete clutch mechanism with 6 tooth sprocket   In good used shape   Fits David Bradley 360 and others

View
$35.00
Ready to ship
(1 in stock)

David Bradley 917.61402 Chainsaw Choke Pull

 Choke lever  In good used shape  Fits Sears David Bradley 917.61402

View
$5.00
Ready to ship
(1 in stock)

David Bradley 360 chainsaw Drivecase

 Drivecase with bar studs and oil line  In good used shape  Fits David Bradley 360   917.series and others

View
$19.95
Sold Out!

David Bradley 360 Chainsaw Air Filter

  Skinner ribbon type air filter element   Intact used condition   Fits David Bradley 360 and others

View
$19.95
Ready to ship
(1 in stock)

David Bradley model # 917.60006 Chainsaw Flywheel Shroud

Part: Flywheel shroud backing plate  Condition: Good used/working shape Fits: David Bradley, model # 917.60006

View
$15.00
Ready to ship
(1 in stock)

David Bradley model # 917.60006 Chainsaw Flywheel Shroud Cover

Part: Flywheel shroud starter cover Condition: Good used/working shape Fits: David Bradley, model # 917.60006

View
$15.00
Ready to ship
(1 in stock)

David Bradley model # 917.60006 governor kit

Part: governor  Condition: Good used/working shape Fits: David Bradley, model # 917.60006

View
$15.00
Ready to ship
(3 in stock)

David Bradley 360 Chainsaw Cylinder Cover

 Tillotson HL carb. HL 92a, HL 92 a   In good used shape, may or may not need fresh gasket and diaphraghm kit installed  Fits David Bradley 360 917.61402 and others

View
$15.00
Ready to ship
(1 in stock)

David Bradley Gear Drive Chainsaw Clutch Assembly

 Clutch assembly with: 4 shoe ceramic clutch mechanism with spring and carrier, pinion gear, washers, and lock nut.  In good used shape  Fits MANY gear driven David Bradley and Sears Craftsman 917... Chainsaws

View
$74.95
Ready to ship
(1 in stock)

David Bradley 360 Chainsaw Carburetor Mounting Elbow

 Intake carb manifold mounting elbow.  In good used shape  Fits David Bradley 360, 917.60003 Chainsaws and others

View
$7.95