Orders Over $150 Ship For Free Within The USA

SEARCH FOR PARTS

Bars and Chains

Guide bars. Huge selection of: New Old Stock, Discontinued, Discounted, and older hard to find bars. All quantities limited on new bars listed here.

If you want chain with your bar call the shop to order so we make sure that you get the right product for your needs. We do custom chains and stock chains in most pitches and gauges.

We can also get regular in stock bars from GB, Silverstreak, Oregon, Windsor, and Carlton.

Ready to ship
(1 in stock)

Tsumura Replacment Sprocket Nose .325 (.063 ga) 48031 (Tip Box 1)

 Tsmura Replacable Sprocket Nose Bar Tip  .325 pitch.  .063 gauge  Part number 48031

View
$10.00
Ready to ship
(4 in stock)

Tsumura Replacment Sprocket Nose 3/8" (.050 .058 ga) 48002 (Tip Box 1)

 Tsmura Replacable Sprocket Nose Bar Tip  .375 3/8 pitch.  .050 or .058 gauge  Part number 48002

View
$15.00
Sold Out!

Tsumura Replacment Sprocket Nose 3/8" (.063 ga) 48032 (Tip Box 1)

 Tsmura Replacable Sprocket Nose Bar Tip  .375 3/8" pitch.  .063 gauge  Part number 48032

View
$10.00
Ready to ship
(2 in stock)

Vintage Chip-A-Saw Bar #1 (PMC)

Rare CHIP-A-SAW bar. Bar has the numbers 33233 * 600 1865 stamped into it.  Dimensions: 11 3/4" long and 2 1/4"wide with a 1/4" bar stud opening New old dealer stock. Stickers on both sides of the bar. Some surface rust from years of storage. We have a few of these in various conditions. You can ...

View
$80.00
Ready to ship
(1 in stock)

Vintage Chip-A-Saw Bar #2 (PMC)

Rare CHIP-A-SAW bar. Bar has the numbers 33233 * 600 1865 stamped into it.  Dimensions: 11 3/4" long and 2 1/4"wide with a 1/4" bar stud opening New old dealer stock. Stickers on one side of the bar. Some surface rust from years of storage. We have a few of these in various conditions. You can ch...

View
$60.00
Sold Out!

Vintage Chip-A-Saw Bar #3 (PMC)

Rare CHIP-A-SAW bar. Bar has the numbers 33233 * 600 1865 stamped into it.  Dimensions: 11 3/4" long and 2 1/4"wide with a 1/4" bar stud opening New old dealer stock. Stickers on one side of the bar. Has rust from years of storage. We have a few of these in various conditions. You can check out t...

View
$30.00
Ready to ship

Windsor 3 Rivit 3/8" Pitch Chainsaw Bar tip SRA222A111 NEW

 Old style 3 rivet replacement tip for Windsor bars. SRA 222 A111, SRA 222 a 111  3/8" pitch.  Accomodates .050 .058 .063 Gauge  New AFTERMARKET part  Fits older windsor bars, and bars that windsor produced for Homelite, Mcculloch, and Partner.

View
$10.95
Sold Out!

Windsor Roll Top Mini 12" .050ga 3/8lp Bar A041 NEW (RDFB)

  12" sprocket nose, laminated bar.  .050ga 3/8 low profile pitch and takes 45 Drive Link Chains    New part   Fits many smaller chainsaws Allis Chalmers 65, 75 Cub Cadet CS3916 Dayton 2Z753, 2Z760, 2Z970, 4Z022, 4Z023, 4Z109, 4Z573,6Z284, 6Z823 Dolmar 100, 101, 102, 103, 104, 105, 106, 108,...

View
$19.95