Orders Over $150 Ship For Free Within The USA

SEARCH FOR PARTS

All our products / roper


Sold Out!

Craftsman Roper 3.7 Chainsaw Ignition Coil 9326R

  Solid state ignitioin group.  Roper part number 9326R   Tested, in good used shape   Fits Craftsman Roper 3.7.   917....model numbers

View
$59.95
Sold Out!

Craftsman D44 Chainsaw Clutch Assembly

 Clutch assembly includes: drum, bearing, 3/8" pitch rim sprocket, mechanism with 4 shoes, 2 clutch springs and carrier plates.  In good used shape  Fits Roper built Craftsman D-44 Direct Drive

View
$45.00
Sold Out!

Craftsman U4G Chainsaw Tecumseh Carburetor Assembly

 Tecumseh carb 610399  In good used shape, may or may not need fresh carb kit installed  Fits many older Tecumseh power products engine Sears, Craftsman, Roper chainsaws.

View
$27.50
Ready to ship

roper built craftsman 3.7 chainsaw rear trigger handle half

Part: rear trigger handle half Condition: good used/working shape Fits: Roper built Craftsman 3.7 chainsaws which model #s begin with the prefix 917 May vary in color .

View
$5.00
Sold Out!

craftsman 3.7 chainsaw top front handle bar

Part: handle bar Condition: good used/working shape-not cracked or bent Fits: Roper built Sears Craftsman 3.7 chainsaws with model number: 917.353760. 

View
$15.00
Sold Out!

Roper Craftsman 3.7 chainsaw fuel tank case assembly

Part: Fuel tank assembly with bar studs Condition: good used shape. some skuffs/paint loss  Fits: Roper built Craftman 3.7 model 917.353760

View
$25.00
Sold Out!

Craftsman Roper D-44 Chainsaw Oil Pump Button

 Manual oil pump plunger button.   In good used shape  Fits Craftsman Roper D44 and others

View
$5.95
Ready to ship
(1 in stock)

Roper craftsman 3.7 chainsaw handle bolt set of 3

  Part: set of 4 bolts/ screws for handle Condition: good used/working order Fits: Roper built Craftsman 3.7 model 917.353760

View
$3.99
Ready to ship
(1 in stock)

Roper craftsman 3.7 chainsaw case bolt set of 4

  Part: set of 4 bolts/ screws  Condition: good used/working order Fits: Roper built Craftsman 3.7 model 917.353760

View
$3.99
Ready to ship
(1 in stock)

Roper Craftsman 3.7 chainsaw handguard

Part: hand guard Condition: good used shape Fits: Roper built Craftman 3.7 model 917.353760

View
$12.95
Ready to ship
(1 in stock)

Roper Craftsman 3.7 chainsaw case bracket

Part: flywheel access cover / case bracket  Condition: good used shape Fits: Roper built Craftman 3.7 model 917.353760

View
$7.50
Sold Out!

Roper Craftsman 3.7 chainsaw rear handle oil tank assembly

Part: rear handle oil tank assembly Condition: good used shape. some skuffs/paint loss  Fits: Roper built Craftman 3.7 model 917.353760

View
$25.00
Ready to ship
(1 in stock)

Roper Craftsman 3.7 chainsaw top handle bracket

Part: top handle bracket and hardware Condition: good used shape Fits: Roper built Craftman 3.7 model 917.353760

View
$7.50
Ready to ship
(1 in stock)

Craftsman Roper 3.7 Chainsaw Copper Oil Line set of 3

  Oil lines   In good used shape   Fits older model craftsman built roper 3.7 917.353760

View
$17.95
Ready to ship
(2 in stock)

Craftsman Roper D44 Chainsaw Flywheel Assembly

 Flywheel and starter cup. 590382, 610709  In good used shape  Fits Craftsman Sears Roper 917. series D-44 and others

View
$29.95
Ready to ship
(1 in stock)

Craftsman Roper 3.7 Chainsaw Copper Oil Line #2

  Oil line   In good used shape   Fits older model craftsman built roper 3.7

View
$7.95
Ready to ship
(2 in stock)

Craftsman Roper 3.7 Chainsaw Copper Oil Line

  Oil line   In good used shape   Fits older model craftsman built roper 3.7

View
$7.95
Sold Out!

Craftsman Roper 3.7 Chainsaw Shortblock

  Shortblock motor assembly.  Piston, cylinder, crankshaft with rod.   In good used shape   Fits older craftsman roper 3.7 chainsaws.  This cylinder is tapped with a port for the compression release on the top side.

View
$69.95
Ready to ship
(1 in stock)

Roper 2.5 Chainsaw Starter Spring 8202R NEW HERR

  Starter rewind recoil spring.  8202R   NEW aftermarket part   Fits Craftsman Sears Roper 2.5

View
$15.00
Ready to ship
(2 in stock)

roper built craftsman 2.5 chainsaw handle grip insert

  Part: rear handle grip insert Condition: good used/working shape Fits: Roper Built Craftsman 2.5 models

View
$5.95
Ready to ship
(3 in stock)

roper built craftsman 3.7 chainsaw white starter housing cover only

Part: white starter housing cover only. PN 2921R   Condition: good used/working shape   Fits: old style Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models  

View
$14.00