Orders Over $150 Ship For Free Within The USA

SEARCH FOR PARTS

Lombard

We have new and used lombard chainsaw parts here. Not so much for the really antique models, but we have lots of parts for comango, ap42 and al42 models of chainsaw.

Sold Out!

1 ft , 7mm spark plug wire for old american chainsaws: homelite, mcculloch, lombard

Part: 1 foot of 7mm black hypolon-copper spark plug wire Condition: new Fits many older American brand chainsaws, such as Homelite, McCulloch, Lombard and others  

View
$5.00
Ready to ship
(1 in stock)

lombard comango ,ap-42, al-42 chainsaw air filter

Part: air filter   Condition: good used/working shape   Fits: Lombard Comango, AL42, AP42, Super Lightning  

View
$3.99
Sold Out!

Lombard Comango AP42, AL42 Phelon Points Ignition Coil

Part: Phelon complete magneto. Points ignition coil Condition: Good used/working shape. Tested and works Fits: Lombard Comango AP 42 AL 42 AP42D, AP-42D

View
$35.00
Sold Out!

lombard comango, ap-42, al-42 chainsaw comet clutch mechanism

  Part: comet clutch mechanism - shoes, carrier, spring   Condition: good used/working shape   Fits: Lombard Comango, AL42 & AP42

View
$27.50
Sold Out!

Lombard Comango, AP42, AL42 fuel cap #1 with O ring

Part: fuel / gas cap with O ring. Does NOT includes the vent/duckbill valve   Condition: good used/working shape.  Fits:  Lombard Comango, AP-42, AL-42

View
$7.95
Sold Out!

lombard comango, ap-42, al-42 chainsaw clutch sprocket (spur type)

Part: clutch spur sprocket drum   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42  

View
$10.00
Sold Out!

lombard comango, ap42, al42 chainsaw manual oil pump button plunger

 Part: manual oiler   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42

View
$7.95
Sold Out!

lombard comango, lightning chainsaw complete clutch assembly

Part: 3/8-7 clutch - includes the rim sprocket drum, comet mechanism (shoes, spring, carrier), bearing nut Condition: good used/working shape Fits: Lombard Comango, AL42 AP42 AP42D AL AP 42 42d Lightning Super and some other models

View
$39.95
Ready to ship
(1 in stock)

Lombard Comango, AP 42, AL 42 Chainsaw Inner & Outer Bar Plate set

Part: set of bar plates Condition: good used/working shape Fits: Lombard Comango, AP42, AL42 Super Lightning.

View
$9.95
Sold Out!

Lombard Comango Chainsaw tillotson Carburetor

Part: tillotson HS carburetor Condition: good used physical shape. May need a carb rebuild kit. Fits: Lombard Comango, may also fit other models

View
$15.00
Sold Out!

lombard lightning chainsaw flywheel and starter pawl set

  Part: flywheel rotor with starter pawl set. may not include nut. Condition: good used/working shape, some minor rust on pawls Fits: Lombard Lightning

View
$17.00
Ready to ship

Lombard Comango, AL-42, at-20, al-20 Chainsaw Choke Button/Rod

Part: choke rod Condition: good used/working shape Fits: Lombard Comango, AL42, AP42, AT20, AL20, Lightning

View
$2.95
Sold Out!

lombard chainsaw black starter assembly

  Part: black starter/ recoil cover housing with pulley, rewind spring and grip Condition: good used/working shape Fits: Lombard chainsaw models such as Comango AP42D AP42 D, AP 42 D

View
$29.95
Sold Out!

lombard comango, ap-42, al-42 chainsaw pawl spring

 Part: (1) starter pawl spring   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42

View
$3.00
Ready to ship
(-4 in stock)

Lombard AP24 and AP24D downloadable pdf Operator's Manual+Dissasembly Manual

Service Manual in pdf form. Upon payment for this item, you will be emailed access to a file in Adobe .pdf format. This link may be used up to 5 times before it expires forever. You will not be able to save it to your device, however the print option is enabled.  These files can be quite large so...

View
$5.00
Ready to ship
(1 in stock)

lombard chainsaw tillotson hs 9a carburetor

  Part: tillotson HS9a / HS-9a carburetor Condition: good used physical shape. May need a carb rebuild kit Fits: many Lombard models, Super Lightning, AP42D, AP-42D, AP42-D and others

View
$19.95
Sold Out!

lombard comango chainsaw clutch cover

Part: clutch sprocket cover Condition: good used/working shape Fits: Lombard Comango AL42 AP42 Lightning and many others

View
$19.95
Sold Out!

lombard comango, ap-42, al-42, lightning chainsaw starter pulley

 Part: starter pulley   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42, Lightning

View
$10.00
Sold Out!

lombard comango, ap-42, al-42 chainsaw starter pawl kit

 Part: pawl kit - includes 2 starter pawls and two spring   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42

View
$8.50
Sold Out!

lombard comango, ap-42, al-42 chainsaw clutch bearing and race

Part:  clutch bearing and race Condition: good used/working shape Fits: Lombard Comango, AP42, AL42  

View
$6.99
Sold Out!

Lombard Comango chainsaw bar adjusting nut

Part: bar adjusting nut / pin Condition: good used/working shape Fits: Lombard Comango

View
$3.99
Sold Out!

Lombard AP42 Chainsaw Exhaust Stack

 Exhaust stack type muffler  In good used shape  Fits many models of Lombard chainsaw: comango, lightning, AP-42, AP-20 and others

View
$9.95
Sold Out!

Lombard AP-42D Chainsaw Decompression Valve

 Compression release valve  In good used shape  Fits Lombard AP42D, AP42 D

View
$12.95
Sold Out!

Lombard Lightning Chainsaw SDC 40 Carburetor

  Walbro SDC40 carb assembly   In good physical condition.  May or may not need fresh gasket and diaphrgam kit   Fits many Lombard models.

View
$19.95
Sold Out!

lombard super lightning chainsaw wico flywheel, complete

  Part: wico prestolite flywheel rotor with starter pawl/spring/stud set Condition: good used/working shape. No broken fins. Fits: Lombard Super Lightning, comango, super comango and others

View
$17.50
Sold Out!

lombard chainsaw complete orange rear trigger handle kit

Part: rear trigger handle housing, includes both cast halves, the throttle trigger, throttle rod, manual oiler Condition: good used/working shape Fits: many models of Lombard chainsaws  

View
$25.00
Sold Out!

lombard lightning chainsaw check valve elbow

  Part: check valve Condition: good used/working shape Fits: Lombard Lightning

View
$5.50
Sold Out!

lombard lightning chainsaw reed valve assembly

  Part: reed valve plate Condition: good used/working shape Fits: Lombard lightning, AP42D, AP42-D, AP-42-D

View
$7.99
Sold Out!

lombard comango, ap-42 chainsaw clutch sprocket (rim type)

  Part: clutch sprocket drum with rim and race with new 3/8- 7 tooth rim installed Condition: good used/working shape Fits: lombard comango, ap42 and some other models

View
$10.00
Sold Out!

lombard comango chainsaw flywheel with starter pawls and screen

  Part: phelon flywheel with screen and starter pawl set Condition: good used/working shape. No broken fins. Fits: Lombard Comango, AP-42, AP42 

View
$19.99
Sold Out!

lombard comango, ap-42, al-42 chainsaw condenser

  Part: condenser Condition: good used/working shape Fits: Lombard Comango, AL-42, AP-42

View
$8.00
Sold Out!

lombard comango, ap-42, al-42 chainsaw intake manifold

Part: intake manifold insulator Condition: good used/working shape Fits: Lombard Comango, AP-42, AL-42, super lightning  

View
$4.99
Sold Out!

lombard comango chainsaw oil line and elbow #3

Part: oil line with elbow Condition: good used/working shape Fits: Lombard Comango  

View
$8.99
Ready to ship
(2 in stock)

lombard comango, ap-42, al-42 chainsaw oil line and compression fitting new (lomb. bin)

 Part: oil line and compression fitting   Condition: new Fits: Lombard Comango, AP-42 & AL-42   Location: Lombard bin

View
$8.00
Sold Out!

lombard comango, ap-42, al-42 chainsaw oil pickup line and elbow

 Part: oil pickup line and elbow   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42

View
$8.99
Ready to ship
(1 in stock)

lombard comango, ap-42, al-42 chainsaw clutch shoe

Part: clutch shoe   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42  

View
$7.99
Sold Out!

lombard comango, ap-42, al-42 chainsaw clutch puck

Part: clutch puck   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42  

View
$5.00
Ready to ship

lombard comango, ap-42, al-42 chainsaw oil cap O ring

 Part: oil Cap O ring seal   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42

View
$3.99
Sold Out!

lombard comango, ap-42, al-42 chainsaw bar chain tensioner adjuster new (Lomb. bin)

Part: chain tensioning screw and bar adjusting nut   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42  

View
$7.99
Ready to ship
(4 in stock)

lombard comango, ap-42, al-42 chainsaw comet clutch carrier

Part: clutch carrier / rotor   Condition: good used/working shape   Fits: Lombard Comango, AP-42 & AL-42  

View
$15.00
Sold Out!

Lombard Comango, AP42, AL42 throttle link boot

Part: throttle link boot   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42  

View
$4.50
Sold Out!

lombard comango chainsaw white starter recoil cover and pulley assembly

 Part: white starter housing cover with pulley and spring   Condition: good used/working shape Fits: Lombard Comango.

View
$28.00
Sold Out!

Lombard Comango, AP42, AL42 choke link grommet

 Part: grommet   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42

View
$3.99
Ready to ship

Lombard Comango, ap42, al42 Chainsaw Ignition Off Switch

Part: off switch Condition: good used, working shape Fits: Lombard Comango, AP 42, AL 42

View
$4.99
Ready to ship
(1 in stock)

Lombard Comango Chainsaw Bar Nuts

Part Name: (2) Bar Nuts Detailed Condition Description: nice used shape Fits the Following Models: comango and some other similar lombard models 

View
$2.95
Ready to ship

Lombard Comango, AL 42, AP 42 + Chainsaw Oil Cap & O ring (metal)

Part: oil cap with O Ring Condition: good used, working shape Fits: Lombard Comango, AP42, AL42, Lightning Super Lightning and some other Lombard models

View
$3.95
Sold Out!

Lombard comango, lightning chainsaw complete bucking spike New 21450 (PMC)

Part: bucking spike felling dog teeth Condition: New, old dealer stock Fits: Lombard Comango, AL42 AP42 AP42D AL AP 42 42d Lightning Super and some other models

View
$30.00
Sold Out!

Lombard Comango Chainsaw Muffler Assembly

 Muffler exhaust assembly with gasket. Only has one bolt  In good used shape  Fits many models of Lombard chainsaw Comango, Lightning, AP42 AP-42 AL42 AL-42 etc.

View
$35.00
Sold Out!

Lombard AP42D Chainsaw Clutch Cover

 Clutch and drivecase cover  In good used shape  Fits many models of Lombard AP42, AL42 D, Comango, Lightning and others

View
$15.00
Sold Out!

Lombard Little Lightning Chainsaw Carburetor

 Tillotson HU35a HU35 a  In good used shape, may or may not need fresh gaskets and diaphragms  Fits Lombard Little Lightning series and others

View
$19.95
Sold Out!

lombard super al-42 chainsaw manual oil pump oiler

  Part: manual oiler plunger assembly Condition: good used/working order Fits: Lombard super AL42 / AL 42, lightning

View
$12.00
Sold Out!

lombard comango chainsaw 4 petal reed valve assembly

  Part: reed valve assembly, with 4 reeds, reed cage and mounting gasket Condition: good used/working shape Fits: Lombard lightning, comango, and many others.  Check yours to be sure it matches since several reeds were used on these saws.

View
$9.95
Sold Out!

Lombard Super Comango Chainsaw Piston and Cylinder

  Piston and cylinder kit.  Includes Piston, rings, cylinder, wrist pin, pin caps, rod, and rod bearings.   In good used shape, makes good compression.  Couple light blemishes on the piston and cylinder lining.   Fits Lombard Super Comango, Lightning III, etc. Not drilled and tapped for compress...

View
$75.00
Sold Out!

lombard pony chainsaw tillotson hu 18a carburetor

  Part: tillotson HU18a carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Lombard Pony,  Skil 1616, Frontier mark I

View
$15.95
Sold Out!

lombard chainsaw wico points ignition coil

  Part: ignition coil with points and condenser Condition: good used/working shape. Tested and makes strong spark Fits: many Lombard chainsaw models

View
$35.00
Sold Out!

lombard super al 42 chainsaw clutch sprocket cover

Part: clutch sprocket guard cover Condition: good used/working shape Fits: lombard super al42 / al-42  

View
$15.99
Sold Out!

lombard super lightning chainsaw fuel line and filter

  Part: fuel line hose with pickup filter and valve Condition: good used/working shape Fits: Lombard Super Lightning

View
$9.95
Sold Out!

lombard super lightning chainsaw oil check valve, hose and filter

  Part: oil valve, line and pickup filter Condition: good used/working shape Fits: Lombard Super Lightning

View
$7.99
Sold Out!

lombard comango, ap-42, al-42 chainsaw early model inner bar plate new (lombard bin)

Part: inner guide bar plate Condition: new Fits: early model (older) Lombard Comango, AL42, AP42 Location: Lombard bin

View
$8.00
Ready to ship
(1 in stock)

lombard comango chainsaw intake manifold gasket

  Part: intake manifold gasket Condition: not perfect but intact and usable Fits: Lombad Comango and some other models

View
$2.99
Sold Out!

lombard comango, ap-42, ap-42 chainsaw oil line and compression fitting used

  Part:oil line with compression fittings Condition: good used/working shape Fits: Lombard Comango, AP-42, AL-42

View
$5.50
Sold Out!

lombard comango chainsaw piston ring

Part: piston ring   Condition: good used/working shape Fits: Lombard Comango  

View
$7.50
Sold Out!

lombard comango chainsaw rod roller bearing set new (lomb. bin)

 Part: roller bearing set for connecting rod   Condition: new Fits: Lombard Comango    Location: Lombard bin

View
$8.00
Sold Out!

lombard comango, ap-42, al-42 chainsaw elbow

 Part: elbow valve   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42

View
$6.50
Ready to ship

lombard chainsaw factory flared bar nut new (lomb bin)

Part: (1) bar nut - factory flared   Condition: new Fits: some Lombard chainsaw models Location: Lombard bin  

View
$2.99
Sold Out!

lombard comango chainsaw crank seal

 Part: crank seal   Condition: good used/working shape Fits: Lombard Comango

View
$6.50
Ready to ship
(1 in stock)

lombard comango, ap-42, al-42 chainsaw oil cap new

Part: oil cap   Condition:new Fits: Lombard Comango, AP-42 & AL-42   Location: Lombard bin  

View
$9.99
Sold Out!

lombard comango, ap-42, al-42 chainsaw choke link

Part: choke link   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42  

View
$6.50
Sold Out!

Lombard Comango, AP42, AL42 black starter recoil cover only

 Part: black housing cover only   Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42

View
$16.95
Sold Out!

lombard comango, ap-42, al-42 chainsaw air filter cover nut

Part:air filter cover nut Condition: good used/working shape Fits: Lombard Comango, AL42, AP42  

View
$4.99
Sold Out!

lombard comango chainsaw spark plug lead wire

Part: spark plug lead wire Condition: good used/working shape-boot in poor condition Fits: Lombard Comango, AP-42 and AL-42

View
$3.50
Sold Out!

lombard pony chainsaw handle cover grip

Part: handle cover grip Condition: good use/working shape Fits: Lombard Pony

View
$5.00
Sold Out!

Lombard Pony Chainsaw Choke and Air Intake

Part: Choke and Air Intake Condition: Good used/working shape Fits: Lombard Pony

View
$7.50
Sold Out!

Lombard al-42 super chainsaw bar stud set

  Part:  bar stud set, bolts Condition: good used/working order Fits: Lombard AL 42 Super comango, lightning, AP-42, AP-20 and others

View
$9.95
Sold Out!

Lombard comango, lightning chainsaw complete bucking spike

Part: bucking spike felling dog teeth Condition: good used/working shape Fits: Lombard Comango, AL42 AP42 AP42D AL AP 42 42d Lightning Super and some other models

View
$14.95
Sold Out!

Lombard Comango Chainsaw Orange Drivecase Assembly NEW

  Drivecase with bearing   New old stock part   Fits Lombard Comango, lightning, AP-42, AL-42 and many other models.  Match to your existing part to be sure.

View
$39.95
Sold Out!

Lombard Comango Chainsaw Flywheel Screen

 Flywheel screen cover  In good used shape  Fits many models of Lombard chainsaw; comango, lightning, ap42, ap-42, al-42, al42 and many others

View
$4.95
Sold Out!

Lombard little lightning Chainsaw air filter and cover

 Air filter cover with screw and nylon filter element. 5-4008, 54008  In good used shape  Fits Lombard Little Lil' Lightning and others

View
$17.95
Sold Out!

Lombard little lightning Chainsaw top and trigger handle cover

 Large plastic top and trigger handle cover  In good used shape  Fits Lombard Little Lil' Lightning and others

View
$29.95
Sold Out!

Lombard AP42 Chainsaw Piston and Cylinder

  Piston and cylinder kit.  Includes Piston, rings, cylinder, wrist pin, pin caps, rod, and rod bearings.   In good used shape, makes good compression.  Couple light blemishes on the piston and cylinder lining.   Fits Lombard AP-42, AL-42, AL42, Comango and others. Not drilled and tapped for com...

View
$75.00
Sold Out!

Lombard AP-42D Chainsaw Chain Oiler Assembly

 Overly complicated manual and automatic chain oil pump kit.  Includes: manual oiler, lines, valves, fittings, and hardware pictured.  In good used shape  Fits Lombard AP42D, AP42 D

View
$27.95
Sold Out!

Lombard AP-42D Chainsaw Hardware kit

 Hardware kit includes screws nuts and bolts pictured.  In good used shape  Fits Lombard AP42D, AP42 D

View
$7.95
Sold Out!

Lombard AP-42D Chainsaw Chain Tensioner

 Bar and chain tensioner adjuster.  In good used shape  Fits Lombard AP42D, AP42 D

View
$7.95
Sold Out!

Lombard AP-42D Chainsaw Muffler Assembly

 Muffler exhaust assembly.  In good used shape  Fits Lombard AP42D, AP42 D

View
$35.00
Sold Out!

lombard chainsaw orange starter assembly

  Part: orange starter/ recoil cover housing with pulley, rewind spring and grip Condition: good used/working shape Fits: Lombard chainsaw models such as Comango AP42D AP42 D, AP 42 D

View
$29.95
Sold Out!

Lombard AP-42D Chainsaw Clutch Bearing

 Clutch sprocket needle roller bearing  In good used shape  Fits Lombard AP42D, AP42 D

View
$6.95
Sold Out!

Lombard AP-42D Chainsaw Clutch Mechanism

 Clutch mechanism with shoes, carrier and springs.  In good used shape  Fits Lombard AP42D, AP42 D

View
$29.95
Sold Out!

Lombard AP-42D Chainsaw Piston and Cylinder Set

 Top end motor kit includes: cylinder head, piston, piston rings, wrist pin, and connecting rod.  In good used shape, makes good compression, no scoring.  Fits Lombard AP42D, AP 42 D, and others

View
$75.00
Ready to ship
(1 in stock)

Lombard Super Lightning Chainsaw Clutch Nut

  Clutch nut and washer   In good used shape   Fits many Lombard models

View
$2.95
Sold Out!

lombard lightning chainsaw lot of assorted hardware

  Part: lot of misc. hardware- screws, bolts, filter mount, bracket (includes everything pictured) Condition: good used/working order Fits: Lombard Lightning

View
$7.50
Sold Out!

Lombard Pony Chainsaw Points Type Flwyeel

  Flywheel assembly with pawls and spring   In good used shape   Fits Lombard Pony and others

View
$15.00
Ready to ship
(1 in stock)

lombard super lightning chainsaw orange air filter cover and knob

  Part: air filter cover and knob 1.1993 Condition: good used/working shape Fits: Lombard Lightning, Super Lightning, may also fit other models

View
$15.00
Ready to ship
(1 in stock)

lombard lightning chainsaw fuel tank

  Part: fuel /gas tank Condition: good used/working shape Fits: Lombard Lightning

View
$25.00
Sold Out!

lombard super al-42 chainsaw tillotson hs33a carburetor with bolts

  Part: tillotson HS-33a carburetor and bolts Condition: good used physical shape, may need a carb rebuild kit Fits: Lombard Super AL 42

View
$20.00
Sold Out!

lombard al-42 super chainsaw lot of assorted hardware

  Part: lot of misc. hardware- bar stud set, bolts, screws (includes everything pictured) Condition: good used/working order Fits: Lombard AL 42 Super

View
$6.50
Sold Out!

Lombard Comango Chainsaw Orange Drivecase Assembly

  Drivecase with bar studs and chain tensioner   In good used shape, bearing and seal may or may not still be usable   Fits Lombard Comango, lightning, AP-42, AL-42 and many other models.  Match to your existing part to be sure.

View
$24.95
Sold Out!

lombard ap42d chainsaw handle support with av buffer mounts

  Part: handle support bracket with 2 rubber av mounts/cushions Condition: good used/working order Fits: Lombard AP 42D and 42AV

View
$12.00
Sold Out!

lombard ap42d chainsaw complete rear trigger handle kit

  Part: rear handle housing with throttle trigger, manual oiler, throttle lock, throttle link, choke rod Condition: good used/working order Fits: Lombard AP 42D

View
$27.50
Sold Out!

lombard campbell-hausfeld C3 chainsaw complete starter recoil assembly

  Part: starter housing cover with pulley, rewind spring and grip Part # 6-1138 Condition: good used/working order Fits: lombard built Campbell-Hausfeld Serial No. C3 chainsaws

View
$29.95