We have some used remington parts. Some for the old remington chainsaws like super 754 and bantam. Tons of mighty mite chainsaw parts. Lots of parts for the mid size models of remington chainsaw PL and SL series.
Sold Out!
Part: muffler body, cover, baffle, plate, screes
Part # 65122, 66269, 66270, 65110, 64649
Condition: good used/working order
Fits: Remington PL 55, may also fit other models
View
$45.00
Sold Out!
Part: woodruff key for the flywheel 104364
Condition: good used/working shape
Fits: Remington Mighty Mite, Mighty Mite Bantam I II III, SL-9, SL9, and others
View
$4.99
Sold Out!
Part: Oil check valve, with new duckbill installed
Condition: good used/working shape
Fits: Remington SL9/SL 9
View
$9.50
Ready to ship (2 in stock)
Part: air deflector filter/bracket
Condition: good used/working shape
Fits: Remington SL9/SL 9
View
$9.99
Sold Out!
Part: crank case cover, sprocket side
Condition: good used/working shape
Fits: Remington Super 754
View
$32.00
Sold Out!
Part: Compression Release Button, Linkage
Condition: Good Used/ Working Order
Fits: Remington Mighty Mite Series Chainsaw
View
$4.95
Sold Out!
Part: bottom handle plate
Condition: good used/working shape
Fits: Remington Super 754
View
$19.95
Sold Out!
Part: air filter cover and knob
Condition: good used/working shape
Fits: Remington SL-9
View
$12.00
Sold Out!
Part: fuel hose line with screen
Condition: good used/working shape
Fits: Remington Super 754
View
$7.50
Sold Out!
Part: clutch side cover
Condition: good used/working shape. Has a minor hairline crack in round center hub area.
Fits: Remington Super 754
View
$19.95
Sold Out!
Part: outer bar plate
Condition: worn but usable
Fits: Remington PL4, PL5
View
$4.50
Sold Out!
Part: point cam
Condition: good used/working shape
Fits: Remington Super 754
View
$9.95
Sold Out!
Part: oil pump oiler with lines and fittings
Condition: good
used/working shape
Fits: Remington Super 754
View
$29.99
Sold Out!
Part: air filter
Condition: good
used/working shape
Fits: Remington Super 754
View
$15.00
Sold Out!
Part: WA 53 walbro carburetor
Condition: good used physical shape. May need a carb rebuild kit.
Fits: Remington Mighty Mite 100, 200 & 300
View
$15.00
Sold Out!
Part:off switch
Condition: good used/working shape
Fits: Remington SL5 & SL4 /
View
$5.99
Sold Out!
Part: throttle link
Condition: good used/working shape
Fits: Remington Mighty Mite 100, 200 & 300
View
$4.99
Sold Out!
Part: throttle kit - includes the throttle trigger, link and lock
Condition: good used/working shape
Fits:Remington Mighty Mite 100, 200 & 300
View
$7.99
Ready to ship (4 in stock)
Part: off switch
Condition: good used/working shape
Fits: Remington Mighty Mite 100, 200 & 300
View
$3.99
Ready to ship (3 in stock)
Part: throttle link
Condition: good used/working shape
Fits: Remington Mighty Mite
View
$4.50
Ready to ship (3 in stock)
Part: choke
Condition: good used/working shape
Fits: Remington Mighty Mite
View
$4.99
Sold Out!
Part: oil rod and lever
Condition: good used/working shape
Fits: Remgington Mighty Mite
View
$4.99
Sold Out!
Part: starter grip handle
Condition: good used/working shape
Fits: Remington Mighty Mite
View
$3.50
Sold Out!
Part: lot of misc. hardware, screws, nuts – includes everything pictured
Condition: good used/working shape
Fits: Remington Super 754
View
$7.99
Sold Out!
Part: top front handlebar
Condition: good used/working shape
Fits: Remington Super 754
View
$16.50
Sold Out!
Part: air filter cover nut
Condition: good used/working shape
Fits: Remington Mighty Mite
View
$3.50
Sold Out!
Part: complete ignition
Condition: good used shape. Tested and has good spark.
Fits: some Remington Mighty Mite models
View
$39.95
Sold Out!
Part: ignition coil with points and condenser
Condition: good used shape. Tested and has good spark.
Fits: some Remington Mighty Mite chainsaws
View
$39.95
Sold Out!
Part: fuel / gas cap
Condition: good used/working shape
Fits: Remington SL9
View
$6.99
Ready to ship (1 in stock)
Part: Filter mount. Pn 60009A
Condition: Good used/working shape
Fits: Remington Super 754
View
$6.95
Sold Out!
Part: Reed valve assembly
Condition: Good used/working shape
Fits: Remington SL-11 PL 4 5 PL4 PL5 SL4 SL5 and others
View
$15.00
Sold Out!
Part: Phelon points ignition coil
Condition: Good used/working shape
Fits: Remington SL-11, and many others. Also Montgomery Wards Powr Kraft saws made by Remington 4.0 5.0 and others.
View
$45.00
Sold Out!
Part: throttle trigger and link
Condition: good used/working shape
Fits: Remington SL11 SL4 SL5 PL4 PL5 and many others.
View
$9.99
Ready to ship (2 in stock)
Part: clutch/sprocket cover
Condition: good used/working shape
Fits: Remington Mighty Mite Bantam
View
$8.00
Sold Out!
Part: Air filter cover
Condition: Good used/working shape
Fits: Remington SL 9
View
$12.00
Ready to ship (1 in stock)
Part: Throttle lock
Condition: Good used/working shape
Fits: Remington Mighty Mite 100, 200, 300
View
$3.95
Sold Out!
Part Name: Decompression valveDetailed Condition Description: good used shapeFits the Following Models: Remington SL-9
View
$5.99
Sold Out!
Part Name: Remington Air Filter
Detailed Condition Description: worn but usable
Fits the Following Models: sl-4 and some othe models
View
$5.00
Sold Out!
Part Name: Stack Type MufflerDetailed Condition Description: in good used orderFits the Following Models: SL-9
View
$7.50
Ready to ship (2 in stock)
Part Name: Inner and Outer Bar PlatesDetailed Condition Description: good used shapeFits the Following Models: SL-9
View
$12.50
Ready to ship (3 in stock)
Part Name: Ignition Off SwitchDetailed Condition Description: nice used shape, in good working orderFits the Following Models: SL-9
View
$4.50
Sold Out!
Part Name: Oil CapDetailed Condition Description: good used shape, not cracked and doesn’t leakFits the Following Models: PL-5
View
$8.00
Sold Out!
Part Name: Trigger Handle Cover
Detailed Condition Description: good used shape, no breaks/cracks
Fits the Following Models: Remington PL-4
View
$6.50
Sold Out!
Part Name: Reed Plate Set
Detailed Condition Description: good used shape
Fits the Following Models: Remington PL-4
View
$4.50
Sold Out!
Part Name: Oil CapDetailed Condition Description: good used shape ,not cracked and doesn’t leakFits the Following Models: Remington PL-4
View
$5.50
Ready to ship
Part: off switch
Condition: good used / working shape
Fits: Remington PL-4
View
$6.00
Sold Out!
Herr Starter rewind spring pn# 65859 FAIRBANKS MORSE Part # 14 020 268
New old stock
Remington sl 9, SL9, sl-9,Sl-10 sl-14 SL-16
View
$9.95
Sold Out!
starter cup 65312
In good used shape
Fits Remington Super 754 and others
View
$12.95
Sold Out!
Herr starter recoil rewind spring 60817a
New old stock. some surface rust/dirt/oxidation from years of storage
Fits Remington PL-5 PL-5A PL 4, PL4, PL 5, PL7A, PL 55A, SL11A, Super 754 and many others
View
$19.95
Sold Out!
Part: oil pump plunger
Condition: good used/working shape
Fits: Remington SL9/SL 9
View
$9.99
Sold Out!
Part: fan housing cover with motor Part # 68706 Condition: good used/working order. We put voltage to this and everything works. It does not come with the battery pack. Fits: Remington Mighty Mite chainsaws
View
$125.00
Ready to ship (1 in stock)
Part: throttle lock
Condition: new old stock. May be dusty/dirty from years of storage.
Fits: Remington Mighty Mite 100, 200, 300, 400, Job Master, Yard Master, Outdoorsman II, Sportsman II
View
$8.75
Sold Out!
Part: piston ring set of three
Condition: new old stock
Fits: Remington PL6 PL 6
View
$23.95
Sold Out!
14" bar and chain. 3/8lp pitch
NEW from old dealer stock
Fits Remington Mighty Mite series with 3/8 pitch 6-tooth sprocket. Mighty Mite 100 200 300 400 500 weekender yardmaster bantam II etc.
View
$25.00
Sold Out!
NEW Oregon Sprocket nose bar with chain. 3/8lp pitch
Fits Remington Might Mite series saws with 6 tooth 3/8lp sprocket
View
$29.95
Sold Out!
Top end motor kit includes: piston, rings, wrist pin, and cylinder head.
Fits Remington SL-9 SL9 and others
In good used shape
View
$89.95
Sold Out!
Part: clutch assy - includes 3/8lp 6-tooth spur sprocket drum, mechanism, bearing and washers
Condition: good used/working shape
Fits: Remington Mighty Mite 100 200 300 400 500 weekender yardmaster jobmaster etc.
View
$19.95
Sold Out!
Wico flywheel fan rotor assembly with starter cup and screen. 65312, 60142
In good used shape
Fits Remington Super 754 and others
View
$39.95
Sold Out!
Snap in, clip on style air filter and carburetor cover. 67977
In good used shape
Fits Remington Mighty Mite Series
View
$19.95
Sold Out!
Part: bucking spike dog dawg
Condition: good used/working shape.
Fits: Remington Super 754
View
$14.95
Sold Out!
Part: air filter cover
Condition: good used/working shape.
Fits: Remington Super 754
View
$19.95
Sold Out!
Carter ND Carb assembly.
In good used physical shape. May or may not need fresh gaskets and diaphragms.
Fits Remington Super 75 and others.
View
$39.95
Sold Out!
Tillotson HS82a HS82 a HS 82a Carb.
Cleaned, rebuilt, and reset to factory specs. May need final adjustments on your saw. Will not correct other further unrelated problems your chainsaw may have.
Fits Remington SL and PL Series SL-4 SL-5 SL4 SL5. John Deere 18 19 etc.
View
$50.00
Sold Out!
Part: lot of misc. hardware-bolts, screws, nuts (includes everything pictured)
Condition: good used/working order
Fits: Remington PL5. May also fit other models
View
$5.00
Sold Out!
Part: Walbro SDC33 SDC 33
Condition: good used physical shape. May need a carb rebuild kit
Fits: Remington PL5. May fit some other models.
View
$32.50
Ready to ship (2 in stock)
Part: fan housing cover only, with no internal parts. Part # 66673 Condition: good used/working order may vary in color Fits: Remington Mighty Mite chainsaws
View
$15.00
Sold Out!
Clutch and drivecase cover. 64391
New old stock part
Fits many remington saws including SL4 SL5 SL 5 4
View
$29.95
Sold Out!
Starter rewind spring pn# 65859
Good Used /Usable
Remington sl 9, SL9, sl-9
View
$9.95
Sold Out!
Flywheel starter cup. 14014127
In good used shape
Fits many Remington Mighty Mite series saws
View
$19.95
Sold Out!
Starter recoil rewind spring 60817a
In good used shape
Fits Remington PL-5 PL-5A and many others
View
$9.95
Ready to ship (3 in stock)
Part: right side housing cover and handle. 69101
Condition: good used/working shape. Plastic is scuffed.
Fits: Remington Mighty Mite 100, 200, 300, 400 500. May also fit other models.
View
$8.00
Sold Out!
Muffler assembly with baffle and bolts. 66372, 66377, 66376
In good used shape
Fits Remington SL-9, SL9 Deluxe, SL-16
View
$29.95
Sold Out!
Part: throttle lock button latch and spring pn 66283
Condition: good used/working shape
Fits: Remington Mighty Mite Series, MMI MMII MMIII Bantam Deluxe
View
$3.95
Sold Out!
Part: tillotson hs7a, HS7 a carburetor with intake manifold adapter, bolt set, filter mount
Condition: good used physical shape. May need a carb rebuild kit
Fits: Remington PL5. May fit some other models.
View
$32.50
Sold Out!
Starter pulley rope spool 66148 In good used shape Fits Remington SL9, SL-9, SL16, SL-16
View
$9.95
Sold Out!
Screw on air filter cover conversion kit. Includes: bracket w/ screws, air filter element, air filter cover w/knob. 66207, 66241, 66242
In good used shape
Fits Remington Mighty Mite Series
View
$29.95
Sold Out!
Part: intake oil line and fittings
Condition: good used/working shape
Fits: Remington PL5/PL 55
View
$6.50
Ready to ship (3 in stock)
Chain bar adjuster tensioner assembly 101175A, 118332, 64349
In good used shape
Fits Remington SL 4 5 , SL4 SL5 PL5 PL 4 5 PL4 and others
View
$9.95
Sold Out!
Part: muffler body with baffle
Part # 66270, 65122
Condition: good used/working shape
Fits: Remington PL55, PL 55 and some other models
View
$19.99
Sold Out!
Part: rear handle assembly - includes rubber grip, handle cover, support, throttle trigger, thrttle link, throttle latch button and spring, idle speed screw
Part # 65861, 63250, 65414, 64317, 64326, 65114, 65413
Condition: good used/working order
Fits: Remington PL 55
View
$29.99
Sold Out!
Part: crank case tank housing
Part# 65930
Condition: good used/working order
Fits: Remington PL 55
View
$29.99
Sold Out!
Part: manual oiler assembly, includes pump, plunger, button, sping, lines, check valves/ fittings and oil lines
Part # 64994 - 65117, 64409, 64691 + others
Condition: good used/working order
Fits: Remington PL 55. May also fit other models
View
$25.00
Sold Out!
Part: crank shaft with connecting rod and thrust bearings
Part # 61546, 65106, 65123
Condition: good used/working order
Fits: Remington PL 55.
View
$29.99
Sold Out!
Part: tillotson hs42a carburetor with intake manifold adapter, bolt set, filter mount and grommet
Condition: good used physical shape. May need a carb rebuild kit
Fits: Remington PL 55. May fit some other models.
View
$27.00
Sold Out!
Part: clutch mechanism (shoes, springs, carreier) with washer
Condition: good used/working shape. light surface rust
Fits: remington power kraft 4.0. Model # TMC-24085 A
View
$15.00
Sold Out!
Part: ignition off switch
Condition: good used/working shape
Fits: Remington PL 55
View
$6.99
Sold Out!
Part: on/off switch
Condition: good used/working shape
Fits: Remington Powr kraft 4.0. Model # TMC-24085 A
View
$4.95
Sold Out!
Part: starter pulley drum
Condition: good used/working shape
Fits: Remington Powr Kraft 4.0. Model # TMC-24085 A
View
$8.00
Sold Out!
Part: flywheel cover screen
Condition: good used/working shape
Fits: Remington SL 11
View
$5.95
Sold Out!
Part: rear handle grip cover
Condition: good used/working shape. Has a small ding.
Fits: Remington SL9/SL 9
View
$6.00
Sold Out!
Part: clutch (plate, 2 shoes and spring)
Condition: good used/working shape
Fits: Remington SL9/SL 9
View
$15.00
Sold Out!
Part: oil line, pickup filter and elbow
Condition: good used/working shape
Fits: Remington SL9/ SL 9
View
$7.99
Sold Out!
Part: clutch spur sprocket drum-1/4" pitch
Condition: good used/working shape
Fits: Remington SL9/SL 9
View
$14.50
Sold Out!
Part: throttle trigger
Condition: good used/working shape
Fits: Remington SL9/ SL 9
View
$5.99
Sold Out!
Part: air filter cover only
Condition: good used/working shape
Fits: Remington SL9
View
$9.99
Sold Out!
Part: fuel/gas cap
Condition: good used/working shape
Fits: Remington SL9
View
$6.99
Sold Out!
Part: manifold
Condition: good used/working shape
Fits: Remington Super 754
View
$6.50
Sold Out!
Part: oil button and rod set
Condition: good used/working shape
Fits: Remington Super 754
View
$12.00
Ready to ship
Part: (1) screw
Condition: good used/working shape
Fits: Remington Mighty Mite
View
$2.99