Part: screw Part # 410622 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: some Jonsered models Location: Box R
Part: pulley screw Part # 410004 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Jonsered 365 Location:Box R
Part: small av buffer mount set Condition: good used/working shape Fits: CS Jonsered 2159 Turbo
Part: chip guard Condition: good used/working shape Fits: Jonsered 2171 Turbo
Part: clutch side cover only equipped for saws with chainbrake Condition: good used, working shape-no breaks Fits: Jonsereds 361
Part: (1) oil cap and (1) fuel cap with keepers Condition: good used, working shape Fits: Jonsereds 365
Part: muffler Condition: good used/working shape Fits: Jonsered 365
Part: cylinder cover shroud, part # 433-008 Condition: good used/working shape Fits: Jonsereds 365
Part: choke rod link, part # 427-248 Condition: good used/working shape Fits: Jonsered 365
Part: handle half Condition: good used/working shape Fits: Jonsered 365
Part: bracket mount, part number 433-009 Condition: good used/working shape Fits: Jonsereds 365
Part: throttle link, part # 123-006 Condition: good used/working shape Fits: Jonsereds 365
Part: throttle linkage Condition: good used/working shape Fits: Jonsered 621
Part: stop switch plate Condition: good used/working shape Fits: many Jonsered models Location: Jonsered 525 bin
Part: muffler bracket. PN 503 91 74-01 Condition: good used/working shape Fits: Jonsered cs2159 Turbo
Part: filter intake mount and bolts Condition: good used/working shape Fits: Jonsered 2150 Turbo
Part: Turbo contact spring Condition: Good used/working shape Fits: Jonsered 2150 Turbo
Part: Ignition off switch Condition: Good used/working shape. Fits: Jonsered 2150 Turbo
Part: AV spring mount Condition: Good used/working shape Fits: Jonsered CS2159 Turbo
Part: crank shaft with connecting rod and bearings Condition: good used/working shape Fits: Jonsered 2150 Turbo
Part: Bar adjusting nut Condition: Good used/working shape Fits: Jonsered 2051, 2054, 2055 Turbo
Part: AV Mount Screw Condition: Good used, working shape Fits: Jonsered 521 E, EV
Part: Throttle cable grommet Condition: Good used/working shape Fits: Jonsered 2053
Part: bar stud / bolt set Condition: good used/working shape Fits: Jonsered 2055, 2054, 2051 Turbo
Part: handlebar-made for heated handles but the heat duct shown coming off the handle is no longer functional Condition: good used shape, not cracked or bent-some dings in rubber gripping Fits: Jonsereds 52 E
Part: handle heater Condition: good used/working shape Fits: Jonsered 52 E
Part: seal Part Number: 504 13 00-21 Condition: new old stock part-may be dusty/dirty/have minor oxidation from year of storage Fits: some Jonsereds chainsaw models Location: Box R
Part: Chain catcher and bar oil strainer Condition: Good used/working shape Fits: Jonsered 90
Part: flywheel cover shroud. Part # 503 12 47-01 Condition: good used/working shape Fits: Jonsereds 490 & 590
Part: clutch carrier/spider Condition: good used/working shape Fits: Jonsered 49 sp, 50, 51, 52, 521
Part: crank case pan/bottom Condition: good used/working shape Fits: Jonsereds 455
Part: brake band and spring Condition: good used/working shape Fits: Jonsered 520 sp
Part: Bar stud / bolt set Condition: Good used/working shape Fits: Jonsered 520 sp
Part: throttle linkage Condition: good used/working shape Fits: Jonsered 49 sp, 50, 51, 52, 52e
Part: bar nut set Condition: good used/working shape Fits: Jonsered 2149 turbo
Part: handle mount spacer Condition: good used/working shape Fits: Jonsered 2149 turbo
Part: Ignition off switch Condition: Good used/working shape Fits: Jonsered 2149 Turbo
Part: Filter mount / control panel Condition: Good used/working shape Fits: Jonsered 2149 Turbo
Part: Air duct Condition: Good used/working shape Fits: Jonsered 2149 Turbo
Part: Flywheel cover / air conductor Condition: Good used/working shape Fits: Jonsered 2149 Turbo
Part: Carburetor cover box housing base. Part # 503 89 66-02 Condition: Good used/working shape Fits: Jonsered 2149 Turbo
Part: Bar Adjuster Pin / nut Condition: Good used/working condition Fits: Jonsered 451 E, EV
Part: Top handle for heated handle Condition: good used/working condition. Rubber gripping has some nicks, tears Fits: Jonsered 455, 525, 535
Part: Bar studs Condition: good used/working condition Fits: Jonsered 455
Part Name: air filter mount holder, intake air horn elbow. PN 503 18 40-01 Condition: good used/working shape Fits: Jonsered 2051, 2054, 2055 Turbo
Part Number: 504 66 21-13Part Description: sleeveFits the Following Models: Jonsered clearing saw rs-51, rs-52 e, rs-40Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box V
Part: intake manifold Condition: good used/working shape Fits: Jonsereds 365
For Jonsered ModelsPart Number: 504 02 57-00Part Description: screwFits the Following Models: fits many models of Jonsered chainsawsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box R
For Jonsered ModelsPart Number: 504 13 18 01Part Description: bandFits the Following Models: fits many models of jonsered chainsawsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box Q
Part Name: Throttle Trigger 504 84 57-07 Detailed Condition Description: good used shape, no breaks Fits the Following Models: Jonsered 910 E EV
Choke linkage. In good used shape. Fits jonsered 90.
Part Name: Handle Bar BracketDetailed Condition Description: good used shape with no breaks, some paint scuffed offFits the Following Models: Jonsered 66E
Part Name: Recoil/Starter Cover only. No internal parts. 504 60 01-07, 504600107 Detailed Condition Description: good used shape, may not have decal Fits the Following Models: Jonsered 521 E EV 521E 521EV
Part: plastic top cover 504 60 20-35 Condition: good used/working shape. Minor melting on underside. Fits: Jonsered 451e, 451ev late model (newer) chainsaws
Part: rear trigger handle. Only includes the throttle trigger and safety Condition: good used/working shape Fits: Jonsered 451 E EV
Part: metal starter pulley Condition: good used/working shape Fits: Jonsered 451 E EV
Muffler in good used shape with no breaks, minor surface rust. Fits jonsered 370.
Part: throttle trigger Part Number: M100053 Condition: good used, working shape Fits: Jonsereds 361, M-36
Part: brake band Condition: good used, working shape Fits: Jonsereds 365
Part: choke holder Part Number: M100091 Condition: good used, working shape Fits: Jonsereds 361, M 36
Part Name: cylinder bolts-four Detailed Condition Description: good used shape Fits the Following Models: Jonsered 2050, 2041, 2045 Turbo
For Jonsered ModelsPart Number: 504 35 79-00Part Description: wire grommetFits the Following Models: fits many models of Jonsered chainsawsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: box Q
For Jonsered ModelsPart Number: 504 18 18-02Part Description: top handle washerFits the Following Models: fts many models of Jonsered chainsawsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: box Q
For Jonsered ModelsPart Number: 504 12 52-00Part Description: slotted screwFits the Following Models: fits many models of Jonsereds chainsawsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: box Q
For Jonsered ModelsPart Number: 504 81 01-00Part Description: plastic wire tieFits the Following Models: fits many models of Jonsered chainsawsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: box Q
For Jonsered ChainsawsPart Number:504 38 10-18Part Description: complete oil pumpFits the Following Models: fits some models of Jonsered chainsawsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box V
Part Name: crankcase tank with crankshaft and rod Condition Description: in good used shape-has some minor chipping-especially on bottom edge Fits the Following Models: Jonsered 910
Part Name: handle support bracket brace with av mount. Part #s 504 73 00-35, 504 12 50-21 Condition: good used/working shape Fits the Following Models: Jonsered 910 E EV
For Jonsered Models Part Number: 504 12 50-24 Part Description: top handle grommet bushing Fits the Following Models: Jonsered 910 E EV Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Box R
Part Name: throttle link rod 504 84 58-04 Part Description: good used shape Fits the Following Models: Jonsered 910
Part Name: handle mount bracketCondition Description: in good used shape-no breaks-some surface rustFits the Following Models: Jonsered 910 E EV
For Jonsered ChainsawsPart Number: 504 62 18-00Part Description: magneto plateFits the Following Models: 90 80 621Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: box Y
Part Name: Jonsered Chainsaw Chainbrake PartPart Number: 504-983411Fits the Following Models: 70E/52EDetailed Condition Description: New old stock part. Never used. Item may be dusty from 30 years of storage.
Bearing, pin & keepers for the piston Good used shape Fits Jonsered 630 chainsaw
Part Number: 505 26 02-20Part Description: sealFits the Following Models: Jonsered 630 830 ,may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box T
For Jonsered ChainsawsPart Description: oil pump springPart Number: 504-214400Fits the Following Models: 621Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
For Jonsered ChainsawsPart Number: 504 38 39 00Part Description: connectorFits the Following Models: 621 80 90, may fit some other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: box W
For Jonsered ChainsawsPart Description: chainbrake pinPart Number: 721437750Fits the Following Models: 490 590Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
For Jonsered ChainsawsPart Description: wrist pinPart Number: 5044 10002Fits the Following Models: 52, 52eDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
Part Name: top handle bar equipped for heated handles Condition Description: in good used shape-not cracked or bent Fits the Following Models: Jonsered 521 E EV 521EV
Part Name: Jonsered Chainsaw Throttle LinkPart Number: 504-841401Fits the Following Models: 49sp, 50, 51, 52Detailed Condition Description: New old stock part. Never used. Item may be dusty from 30 years of storage.
Muffler with duct work attached for handles heated by excess exhaust gasses. This is a rare item. Muffler is in very good condition with some surface corosion. The attachement points for the exhaust gas tubes are in great shape but the little tubes will need to be replaced.
Part: air intake mount Condition: good used/working shape Fits: Jonsered 451e / 451ev
Part: muffler 504 72 00-20Condition: has some denting but is in good used/working shapeFits: Jonsered 451E 451EV
For Jonsered Chainsaws Part Description: lower handle half Part Number: 504-655806 Fits the Following Models: 451 E
Part: filter mount, part # 504 35 86-06 Condition: good used/working shape Fits: Jonsered 510sp, 520sp, 450. May also fit other models.
For Jonsered ChainsawsPart Number: 504 05 87-02Part Description: pinFits the Following Models: 450 510 520 455Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box T
For Jonsered ChainsawsPart Number: 504 64 56-02Part Description: starter pawlFits the Following Models: 450 455 510 520Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: box V
Intake manifold. This is the plastic plate that mounts between the carb and cylinder. Nice shape with no breaks. Fits Jonsered 370.
Flywheel with both starter pawls. In nice shape, not cracked or broken. Fits Jonsered 370..
Choke rod with plastic knob. In nice shape. Fits jonsered 370.
Air intake base/box in good used shape. Fits Jonsered 370.
Part Number: 507 43 29-41 Part Description: gasket Fits the Following Models: Jonsered 365, Husqvarna 35 Condition Description: New old stock part. Location: Box V
Part Name: crank case bottom. PN 100622 Condition Description: good used/working shape Fits the Following Models: Jonsered 361
Part Name: Condition Description: in good used shape-no breaksFits the Following Models: Jonsered 2055 TurboThis is a USED part, in good working order.
Part Name: top cover screw clipDetailed Condition Description: good used shape Fits the Following Models: Jonsered 2040 TurboThis is a USED part, in good working order.
Part Name: flywheel cover shroudDetailed Condition Description: good used shape with no breaksFits the Following Models: Jonsered 2040 TurboThis is a USED part, in good working order.
Part Name: flywheel baffle/coverFits the Following Models: Jonsered 2036 TurboThis is a USED part, in good working order.
Part Name: set of 3 u nuts/crankcase clipsFits the Following Models: Jonsered 2036 TurboThis is a USED part, in good working order.