(1 in stock)
Shindaiwa 360 Chainsaw Carb Adjust Grommet
Carburetor adjustment screw grommet. 22156-31120 In good used shape Fits Shindaiwa 360
Shindaiwa 360 Chainsaw Coil
Shindaiwa 360 ignition coil. 20024-71610 Tested, in good used shape Fits Shindaiwa 360 and others
Shindaiwa 416 Chainsaw Clutch Cover Chainbrake Assembly
Part: Clutch cover chainbrake assembly. Includes clutch cover, brake band, handle. 72159-54006, 7215954006 Condition: Good used/working shape. HAS BEEN REPAIRED AS PICTURED Fits: Shindaiwa 345, 500, 450, 416
(1 in stock)
Shindaiwa 360 Chainsaw Starter assembly
Starter cover and pulley assembly pn 22154-75101 Good Used /Usable Shindaiwa 360
Shindaiwa 695 Chainsaw Starter cover only
Part: starter housing cover only, bare bones. 22152-75210, 2215275210 Condition: good used/working shape Fits: Shindaiwa 695, 550, 680, 575 and others
(1 in stock)
Shindaiwa 360 Chainsaw Top Handle
Top front handle. 22156-32110, 2215632110 In good used shape Fits Shindaiwa 360 377
shindaiwa 695 & 575 chainsaw cylinder
Part: 49mm bore OEM cylinder only – 22155-12111 Condition: good used/working shape. Came off a saw with good compression. No breaks. Fits: Shindaiwa 695 & 575
Shindaiwa 695 Chainsaw Muffler Guard
For Shindaiwa Chainsaws Part Description: muffler guard Fits the Following Models: 575 680 695 Part Number: 72230-15310 Detailed Condition Description: in good used shape
Shindaiwa 350 chainsaw Complete Clutch Assembly 3/8" LP - 6T
Complete clutch assembly includes: 3/8lp x 6 tooth sprocket drum, needle bearing, 4 shoe clutch mechanism with carrier rotor and garter spring, and clutch boss. 22102-51310, 22945-61100, 22104-51200, 22120-51210 Condition: in good used shape Fits: Shindaiwa (SDK) 305, 340, 350, 451 running 3/8 lo...
(2 in stock)
shindaiwa 500, 451 chainsaw engine housing case #2
Part: engine housing case shroud, part # 72105-31110 Condition: good used/working shape. Has some pitting / oxidation Fits: Shindaiwa 500, 451
Shindaiwa 500 Chainsaw Secondary Ignition Module
Exciter transformer module. 22128-71620, 2212871620 Tested, in good working order Fits Shindaiwa 500
Shindaiwa 360 Chainsaw Air Filter Cover
Air filter cover with knob 72299-31200 In good used shape Fits Shindaiwa 360 and others
(1 in stock)
Shindaiwa 695 Chainsaw Top handle
Half wrap top handle. Shindaiwa part number 22150-32112 In good used shape Fits Shindaiwa 575, 695 and others.
shindaiwa 357 chainsaw tank vent and line
Part: fuel tank vent with line pipe Part # 72320-85220, 20035-85522 Condition: good used/working order Fits: Shindaiwa 357
shindaiwa 357 chainsaw complete spur sprocket and clutch assembly
Part: 3/8-7 spur sprocket drum with mechanism, bearing, washer Part # 72320-51110, 72320-51200, 22102-51310 Condition: good used/working order Fits: Shindaiwa 357
shindaiwa 357 chainsaw intake manifold and reed valve
Part: intake manifold block with reed valve and gaskets Part # 72320-83101 Condition: good used/working order Fits: Shindaiwa 357
shindaiwa 357 chainsaw fuel and oil cap set
Part: set of caps, fuel and oil Part # 72320-31400 Condition: good used/working order Fits: Shindaiwa 357
shindaiwa 357 chainsaw walbro wt-301c carburetor
Part: walbro wt 301c / wt 301 carburetor Part # 72320-81000 Condition: good used physical shape, may need a carb rebuild kit Fits: Shindaiwa 357
shindaiwa 357 chainsaw ignition coil assembly
Part: ignition coil Part # 72320-71600 Condition: tested and in good used/working order Fits: Shindaiwa 357
shindaiwa 357 chainsaw choke rod and grommet
Part: choke rod with grommet Part # 72320-82140, 72320-82150 Condition: good used/working order Fits: Shindaiwa 357
shindaiwa 357 chainsaw complete oil pump assembly
Part: oil pump oiler assembly with cover, worm gear, pump, lines Part # 72320-55200, 72320-55300, 72320-56110, 7320-55110 Condition: good used/working order Fits: Shindaiwa 357
shindaiwa 357 chainsaw brake band, springs and cover
Part: brake band, spring, small spring, cover, links Part #s 72320-54210, 72320-54230, 72320-54610,72320-54580 Condition: good used/working order Fits: Shindaiwa 357
shindaiwa 357 chainsaw chain tensioner adjuster
Part: chain tensioning screw with adjusting nut/pin Part # 22150-52440, 22154-52421 Condition: good used/working order Fits: Shindaiwa 357
shindaiwa 488 chainsaw oil pump and gear
Part: oil pump oiler and drive gear Part # 22160-551200, 22154-55110 Condition: good used/working order Fits: Shindaiwa 488
(1 in stock)
shindaiwa 550, 575, 580, 680, 685, 695 chainsaw herr 3/8-7t spur sprocket drum new pn 244-a7
Part: 3/8" pitch x 7t spur sprocket drum only Herr Part # 244a7 Condition: new Fits: some models of Shindaiwa 550, 575, 580, 680, 685, 695
shindaiwa 488 chainsaw air filter assembly
Part: air filter Part # 22157-82400 Condition: good used/working order Fits: Shindaiwa 488
shindaiwa 500, 451 chainsaw lot of assorted hardware and bumper spike
Part: lot of assorted hardware / small parts - spike, mount, screws, washers (includes everything pictured) part # 22118-57610 + Condition: good used/working order Fits: Shindaiwa 500, 451
(2 in stock)
shindaiwa 500, 451 chainsaw clutch mechanism
Part: clutch mechanism (shoes, spring) with washer Part # 22100-51220, 22102-51230 Condition: good used/working order Fits: Shindaiwa 500, 451
shindaiwa 415 chainsaw complete .325" rim sprocket, 3 shoe clutch assembly
Part: clutch assembly - incudes the .325" rim sprocket drum, 3 shoe clutch mechanism, bearing, washers Part # 22131-98100, 22131-51200 Condition: good used/working order Fits: Shindaiwa 415
shindaiwa 500, 451 chainsaw bar nut set
Part: set of bar nuts Condition: good used/working shape Fits: Shindaiwa 500, 451
shindaiwa 488 chainsaw lot of assorted hardware
Part: lot of misc. hardware - screws / bolts / nuts (includes everything pictured) Condition: good used/working shape Fits: Shindaiwa 488
shindaiwa 488 chainsaw carb grommet and stopper
Part: carburetor grommet with stopper (22160-22250) Condition: good used/working shape Fits: shindaiwa 488
shindaiwa 488 chainsaw av buffer mount cushion set of 4
Part: set of 4 av buffer mounts Condition: good used/working shape Fits: shindaiwa 488
shindaiwa 488 chainsaw air filter #2
Part: air filter assembly Condition: good used/working shape Fits: shindaiwa 488
shindaiwa 488 chainsaw clutch sprocket assembly
Part: includes .325-7 sprocket drum, bearing, washer cover, rim and mechanism (shoes, springs, carrier boss Part # 22160-51200 and 22160-51501 Condition: good used/working shape Fits: shindaiwa 488
shindaiwa 488 chainsaw hand guard with chainbrake parts
Part: handle handle lever with brake band, spring, bolts, collar, block and other small parts for the chainbrake Part # 22160-54511, 72231-54620, 72231-54610, 72231-54580, 72231-54590, 22150-54630, 22160-54211, 22150-54320, 22150-54330, 72311-54710 Condition: good used/working shape F...
shindaiwa 488 chainsaw crankcase assembly with crankshaft
Part: crank case engine housing chassis with crankshaft and rod Part# 22160-42001, 22157-21201, 72312-21502 Condition: good used/working shape Fits: Shindaiwa 488
(2 in stock)
shindaiwa 451, 500 chainsaw av buffer mount #10
Part: av buffer mount Condition: good used/working shape Fits: shindaiwa 500, 451, 345
shindaiwa 500, 451 chainsaw rubber grommet plug
Part: rubber grommet plug Condition: good used/working shape Fits: shindaiwa 500, 451
(3 in stock)
shindaiwa 500, 451 chainsaw intake manifold boot
Part: intake connector manifold boot, part # 22136-14130 Condition: good used/working shape Fits: shindaiwa 500, 451
(1 in stock)
shindaiwa 500, 451 chainsaw starter pawl kit
Part: starter pawl/ ratchet kit for the flywheel. Includes 2 starter pawls, spring, studs and washers. Part #s 22100-71410, 22100-71441, 22100-71420 Condition: good used/working shape Fits: shindaiwa 500, 451
shindaiwa 500, 451 chainsaw oil pump push lever
Part: oil pump push lever, part #s 22100-55650, 2200-55640, 22100-55610 Condition: good used/working shape Fits: Shindaiwa 500, 451
shindaiwa 500 chainsaw clutch side cover
Part: clutch sprocket cover only. Part # 72159-54103 Condition: good used/working shape. Has some pitting/oxidation. Fits: Shindaiwa 500 416 and others
(1 in stock)
shindaiwa 500, 451 chainsaw av buffer mount #8
Part: av rubber cushion mount Condition: good used/working shape Fits: Shindaiwa 500, 451
shindaiwa 500, 451 chainsaw fuel cap # 1 (no keeper)
Part: fuel / gas cap without the keeper Condition: good used/working shape Fits: Shindaiwa 500, 451
shindaiwa 500, 451 chainsaw top handle bar
Part: top front handlebar Part # 22136-32150 Condition: good used/working shape Fits: Shindaiwa 500, 451
(2 in stock)
shindaiwa 500, 451 chainsaw carb bracket and screw set
Part: carburetor bracket with screw/ bolt set Part # 22128-82130 & 11020-05400 Condition: good used/working shape Fits: Shindaiwa 500, 451
(1 in stock)
shindaiwa 500, 451, 354 chainsaw clutch spring pn 22102-51210 new (shin. 500 bin)
Part: clutch spring Part # 22102 51210 Condition: new. Dusty from years of storage. Fits: Shindaiwa 500, 451, 345. May also fit other models Location: Shindaiwa 500 bin
shindaiwa 500, 451 chainsaw fuel cap pn 22128-85200 new (shin. 500 bin)
Part: fuel/gas tank cap Part # 22128 85200 Condition: new. Dusty from years of storage. Fits: Shindaiwa 500, 451. May also fit other models Location: Shindaiwa 500 bin
shindaiwa 500, 451 chainsaw oil cap pn 22128-57200 new (shin. 500 bin)
Part: oil tank cap Part # 22128 57200 Condition: new. Dusty from years of storage. Fits: Shindaiwa 500, 451. May also fit other models Location: Shindaiwa 500 bin
shindaiwa 575, 695 chainsaw adjusting rod pn 22150-54311 new
Part: brake adjusting rod Part # 22150-54311 Condition: new Fits: Shindaiwa 575, 695 Location: new Shindaiwa bin
shindaiwa 345 chainsaw starter/recoil cover only
Part: starter cover only Condition: good used/working shape Fits: Shindaiwa 345
shindaiwa 345 chainsaw oil tank
Part: oil tank Condition: good used/working shape Fits: Shindaiwa 345
shindaiwa 345 chainsaw oil cap
Part: oil cap Condition: good used/working shape Fits: Shindaiwa 345
(1 in stock)
shindaiwa 345 chainsaw engine cover housing
Part: engine cover Condition: good used/working shape Fits: Shindaiwa 345
Shindaiwa 345 Chainsaw Oil Pump/oiler
Part: Oil pump oiler with shaft and drive gear Condition: Good used/working shape Fits: Shindaiwa 345
Shindaiwa 345 Chainsaw Oil Pump gear
Part: Oil pump gear Condition: Good used/working shape Fits: Shindaiwa 345
Shindaiwa 345 Chainsaw Oil Pump Cover
Part: Oil pump cover Condition: Good used/working shape Fits: Shindaiwa 345
(1 in stock)
Shindaiwa 345 Chainsaw Handle Bar Bracket
Part: Handle bar bracket Condition: Good used/working shape Fits: Shindaiwa 345
(1 in stock)
shindaiwa 345 chainsaw fuel/gas cap
Part: fuel cap Condition: good used/working shape Fits: Shindaiwa 345
Shindaiwa 345 Chainsaw Fuel Tube/Line
Part: Fuel tube/line Condition: Good used/working shape Fits: Shindaiwa 345
shindaiwa 345 chainsaw clutch sprocket
Part: clutch sprocket/drum with bearing and washer Condition: good used/working shape Fits: Husqvarna 345
shindaiwa 345 chainsaw rear trigger handle air box
Part: rear trigger handle with the throttle trigger/link and safety Condition: good used/working shape Fits: Shindaiwa 345
shindaiwa 345 chainsaw walbro carburetor
Part: walbro carburetor Condition: good physical used shape-may or may not need a carb rebuild kit Fits: Shindaiwa 345
Shindaiwa 345 chainsaw clutch shoe
Part: clutch shoe Condition: good used/working shape Fits: Shindaiwa 345
shindaiwa 488 chainsaw trigger handle cover set
Part: trigger handle cover set Condition: good used/working shape Fits: shindaiwa 488
shindaiwa 488 chainsaw bar plate set
Part: bar plate set Condition: good used/working shape Fits: shindaiwa 488
shindaiwa 488 chainsaw flywheel and starter pawls
Part: flywheel and starter pawls. Part # 22160-71100 Condition: good used/working shape with no broken fins Fits: shindaiwa 488
(1 in stock)
shindaiwa 488 chainsaw air filter cover and nut #1
Part: air filter / cleaner cover. Part # 22157-82500 (22157-82510 & 22155-82520) Condition: usable shape-has a crack on the corner and scuffing Fits: shindaiwa 488
(2 in stock)
Shindaiwa 500 Chainsaw Starter Recoil Cover Pulley Assembly #1
Part: Recoil cover pulley assembly Condition: Good used/working condition. Has a section of broken out grills. Fits: Shindaiwa 500
shindaiwa 550 chainsaw top front handle bar
Part: handle bar Condition: good used/working shape-not cracked or bent Fits: Shindaiwa 550
shindaiwa 550 chainsaw oil pump oiler assembly
Part: oil pump assembly Condition: good used/working shape Fits: Shindaiwa 550
shindaiwa 550 chainsaw starter/recoil cover and pulley assembly
Part: starter housing cover with the pulley, spring and pulley grip Condition: good used/working shape Fits: Shindaiwa 550
shindaiwa 550 chainsaw walbro carb carburetor
Part: walbro carburetor Condition: nice physical used condition-may or may not need a carb rebuild kit Fits: Shindaiwa 550
shindaiwa 550 chainsaw bar/chain tensioner adjuster
Part: chain tensioner Condition: good used/working shape Fits: Shindaiwa 550
shindaiwa 550 chainsaw inner and outer bar plate set
Part: bar plate set Condition: good used/working shape Fits: Shindaiwa 550
shindaiwa 550 chainsaw flywheel and starter pawls
Part: flywheel and starter pawls Condition: good used/working shape with no broken fins Fits: Shindaiwa 550
shindaiwa 550 chainsaw intake manifold boot
Part: intake boot Condition: good used/working shape Fits: Shindaiwa 550
shindaiwa 550 chainsaw rim drum clutch assembly
Part: clutch-includes the rim drum and mechanism Condition: good used/working shape-has minor surface rust Fits: Shindaiwa 550, 575, 680, 695 and others.
(2 in stock)
Shindaiwa 695 Chainsaw set of 4 AV Buffer Mount Set
Part: set of 4 av buffer mounts Condition: good used/working shape Fits: Shindaiwa 695
(3 in stock)
Shindaiwa 695 chainsaw bar chain tensioner adjuster
Part Name: chain tensioning screw and bar adjusting nut Condition: good used shape Fits the Following Models: Shindaiwa 695
(2 in stock)
Shindaiwa 695 Oil Guide bar Plate
Part Name: Guide Plate Condition: good used shape Fits the Following Models: 695
Shindaiwa 695 680 575 Muffler Gasket Spacer 72231-15120
For Shindaiwa ChainsawsPart Description: muffler spacerFits the Following Models:575 680 695Part Number: 72231-15120Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
Shindaiwa 695 575 Muffler Bolt PN 22150-15411 NEW
For Shindaiwa ChainsawsPart Name: Shindaiwa Chainsaw Muffler BoltPart Number: 22150-15411Fits the Following Models: 575, 695, may also fit other Shindaiwa modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of st...
(3 in stock)
Shindaiwa 695 575 Heavy Duty AV Mount 22150-97810 NEW
For Shindaiwa ChainsawsPart Name: Shindaiwa Chainsaw Heavy Duty AV MountPart Number: 22150-97810Fits the Following Models: 575/695, may also fit other Shindaiwa modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of s...
Shindaiwa 680 695 575 Muffler Bolt Keeper 22150-15420
For Shindaiwa ChainsawsPart Description: muffler bolt keeperFits the Following Models: 680 575 695Part Number: 22150-15420Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
Shindaiwa 586, 685 Chain Catcher PN 22150-52510 NEW
For Shindaiwa ChainsawsPart Name: Shindaiwa Chain CatcherPart Number: 22150-52510Fits the Following Models: 586, 685, may also fit other Shindaiwa modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
(1 in stock)
Shindaiwa 577 575 695 Spark Arrester PN 72230-15160 NEW
For Shindaiwa ChainsawsPart Name: Shindaiwa Spark ArresterPart Number: 72230-15160Fits the Following Models: 577, 575, 695, may also fit other Shindaiwa modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
Shindaiwa 575, 695 Chainsaw AV Mount PN 22150-33730 NEW
For Shindaiwa ChainsawsPart Name: Shindaiwa AV MountPart Number: 22150-33730Fits the Following Models: 575, 695may also fit other Shindaiwa modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
(1 in stock)
Shindaiwa 575, 695 Boot Gasket PN 22150-12160 NEW
For Shindaiwa ChainsawsPart Name: Boot GasketFits the Following Models: 575, 695, may also fit other Shindaiwa modelsPart Number: 22150-12160Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
Shindaiwa 575 680 695 Muffler Guard PN 72230-15310 NEW
For Shindaiwa ChainsawsPart Description: muffler guardFits the Following Models: 575 680 695Part Number: 72230-15310Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
Shindaiwa 575 680 695 Muffler Cover PN 72230-15180 NEW
For Shindaiwa ChainsawsPart Description: muffler coverFits the Following Models: 575, 680, 695 Part Number: 72230-15180Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
Shindaiwa 550 Chainsaw Air Filter Cover w/Nut
Part Name: Air Filter Cover with nutDetailed Condition Description: useable shape-crack on top of cover as visible in pictureFits the Following Models: 550
(3 in stock)
Shindaiwa 500 451 Chainsaw Throttle Trigger and Link
Part Name: throttle trigger and link. In good used shape Fits the Following Models: Shindaiwa 500 451
Shindaiwa 500, 451 Chainsaw Oil Tank
Part Name: Oil Tank, 22140-57110 Detailed Condition Description: good used/working shape Fits the Following Models: Shindaiwa 500 451 415
(2 in stock)
Shindaiwa 500 451 Chainsaw Inner & Outer Bar Plate Set
Part Name: Inner & Outter Bar Plate set. In good used shape Fits the Following Models: 500 451
(4 in stock)
Shindaiwa 500, 451 Chainsaw Ignition Off Switch
Part Name: Ignition Off Switch. In good used/working shape Fits the Following Models: Shindaiwa 500, 451
(1 in stock)
Shindaiwa 415 Chainsaw Starter Assembly
Starter recoil rewind cover assembly. 99900-00217, 9990000217 In good used shape Fits Shindaiwa 415 and others
(1 in stock)
Shindaiwa 500 Chainsaw Carburetor Metering Lever Kit 22100-81200 NEW
Carb fuel inlet metering lever kit with spring, needle, lever and screen 2210081200 NEW Fits Many Shindaiwa Models