(2 in stock)
Craftsman Roper D44 Chainsaw Flywheel Assembly
Flywheel and starter cup. 590382, 610709 In good used shape Fits Craftsman Sears Roper 917. series D-44 and others
(2 in stock)
Craftsman Roper 2.5 Chainsaw Starter Assembly
Starter recoil rewind assembly includes: cover, plastic pulley, spring and clip. In good used shape Fits Roper built craftsman 2.5cid
(1 in stock)
Craftsman Roper 3.7 Chainsaw Copper Oil Line #2
Oil line In good used shape Fits older model craftsman built roper 3.7
(1 in stock)
Craftsman Roper D-44 Chainsaw Rear handle engine shroud
Bottom rear handle, engine shroud 6119-H In good used shape Fits Sears Craftsman Roper Built D-44 chainsaw
(2 in stock)
Craftsman Roper 3.7 Chainsaw Copper Oil Line
Oil line In good used shape Fits older model craftsman built roper 3.7
Craftsman Roper 3.7 Chainsaw Shortblock
Shortblock motor assembly. Piston, cylinder, crankshaft with rod. In good used shape Fits older craftsman roper 3.7 chainsaws. This cylinder is tapped with a port for the compression release on the top side.
(1 in stock)
Roper 2.5 Chainsaw Starter Spring 8202R NEW HERR
Starter rewind recoil spring. 8202R NEW aftermarket part Fits Craftsman Sears Roper 2.5
(1 in stock)
roper built craftsman sportster chainsasw muffler cover front
Part: muffler front Condition: good used/working order Fits: Craftsman built Roper Sportster chainsaws
(1 in stock)
craftsman roper chainsaw starter spring shield set
Part: set of shield plate for the starter Condition: good used/working order Fits: Craftsman built roper sportster chainsaws
(1 in stock)
roper built craftsman 3.7 chainsaw tillotson hs 143b
Part: tillotson HS-143 b carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Roper built Craftsman 3.7 with model # 917.353760 and some other models
(1 in stock)
sears craftsman built roper d-44 chainsaw muffler kit
Part: muffler Condition: good used/working order Fits: Craftsman built Roper D44 models with models # 917.351140 and some other models
(4 in stock)
craftsman built roper 3.7 chainsaw fuel cap (early model) pn 9122H
Part: fuel cap with O ring Part # 9122H Condition: good used/working shape Fits: Craftsman built Roper 3.7 chainsaws with model # 917.351090 and some other model #s
(1 in stock)
roper built craftsman 2.5 chainsaw bottom plate shroud
Part: bottom plate shroud Condition: good used/working shape-no breaks Fits: roper built craftsman 2.5 chainsaws
(1 in stock)
roper built craftsman 2.5 chainsaw starter housing cover only
Part: starter recoil cover Part # 9559 Condition: good used/working shape Fits: Roper built craftsman 2.5 chainsaws
(2 in stock)
roper built craftsman 2.5 chainsaw handle grip insert
Part: rear handle grip insert Condition: good used/working shape Fits: Roper Built Craftsman 2.5 models
(4 in stock)
roper built craftsman 3.7 chainsaw air filter cover nut type 1
Part: air filter cover nut knob Condition: good used/working shape Fits: old style Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
(3 in stock)
roper built craftsman 3.7 chainsaw white starter housing cover only
Part: white starter housing cover only. PN 2921R Condition: good used/working shape Fits: old style Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
(2 in stock)
roper built craftsman 3.7 chainsaw drivecase carrier with bearing
Part: drivecase carrier with keystone bearing Condition: good used/working shape. Has a small/minor chip on edge Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
roper built craftsman 3.7 chainsaw baffle shield plate
Part: flywheel shroud, baffle plate cover Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(1 in stock)
roper built craftsman 3.7 chainsaw crankcase and bar studs
Part: crank case with bar stud / bolt set Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(4 in stock)
roper built craftsman 3.7 chainsaw air filter mount
Part: filter mount cover Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(2 in stock)
roper built craftsman 3.7 chainsaw red starter recoil cover only
Part: starter housing cover only. PN 2921R Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
(1 in stock)
roper built craftsman 3.7 chainsaw pin
Part: pin Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
roper built craftsman 3.7 chainsaw rubber av buffer mount #2
Part: buffer mount Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.