We have used efco chainsaw parts for newer models on hand.
Inside guide bar plate part number: 50010010a In good used shape Fits Efco 156 165
Top cover engine shroud. Part number 50012099R In good used shape Fits Efco Oleo-Mac 156, 165
Part: 3/8-7 rim sprocket drum with mechanism, bearing, rim, washer Part #s 50022034, 50012023ar Condition: good used/working order Fits: Efco 156, 165, 956, 962, CS-56
Part: tank vent assembly Part # 099900083a Condition: good used/working order Fits: efco mt 7200, mt 8200, 981, 962, 956, 156, 165, 970, 962
Throttle link knob end. Part number 50070197A NEW Fits Efco 952, 947, 152, 147, 940 and others
Throttle control linkage. 50070044 NEW Fits Efco 152, 147, 952, 947
Throttle safety lever 50050096 AR NEW Fits Efco 152, 147, 952, 947
Part: starter choke lever Part # 50070228 Condition: new Fits: Efco 152, 147, 947, 952
Part: fuel tank rear trigger handle assembly Part # 50120029r Condition: in good used shape. Small 3/8" long crack on rear handle as pictured. Fits: Efco Olympyk 940 936. John Deere CS36 CS40 CS 36 40
PART: brake band with lever, spring, pin + PART # 50050039r, 50010243, 50050125r, 097000146, 097000106 CONDITION: good used/working order FITS: efco 952, 947 152 147
Part: brake band Part # 50050039 R Condition: new Fits: Efco 952, 947, 940, mt-4000, mt-3700, 147, 152 and some other efco models
Part: igniton coil module Part # 50020007 br Condition: new Fits: Efco 962, 165, 956, 156 chainsaws Built before 11/12/2007 Before serial number 0937509999
Part: muffler assembly Part # 5200393 R, 52010393R, 52010393 R Condition: new Fits: Efco MT 8200 and MT 7200, 980, 970, 981, 971. John Deere CS81 CS-81 Location: new efco bin2
Part: piston and cylinder kit - includes the rings, wrist pin, keeper clips and base gasket Part # 50082012, 50070047a, 50082012B Condition: new Fits: Efco 152 and 952 Location: new efco bin2
Part: air filter Part # 50200009r Condition: new Fits: efco mt 8200, mt 7200 location: new efco bin 1
Part: bar stud / bolt set Condition: good used/working shape Fits: Efco 952
Part Name: intake manifold boot 50010026 Condition Description: in good used shape-no breaks Fits the Following Models: Efco 962, 956, 156, 165 may have clip or screw type clamp This is a USED part, in good working order.
Part Name: ignition coilCondition Description: in good used shape-tested and worksFits the Following Models: Efco 952 and Efco 947This is a USED part, in good working order.
Part Name: .325-7 rim drum clutch assembly-includes the drum, rim, bearing and washer. 50080023, 005000165, 094500297R Condition Description: in good used shape-no breaks Fits the Following Models: Efco 952 947 152 147 This is a USED part, in good working order.
Part Name: spur drum clutch-includes the drum, mechansim, bearing and washerCondition Description: in good used shape-no breaksFits the Following Models: Efco 947This is a USED part, in good working order.
Part Name: crankcase/tank with the crankshaft, rod,studsCondition Description: in good used shape-no breaks or leakFits the Following Models: Efco 947This is a USED part, in good working order.
Part: fuel tank rear trigger handle/top handle kit. Includes throttle, safety interlock and 2 AV spring mounts. Part # 50070065 BR Condition: good used shape Fits: efco 152, 952, 147, 947, John Deere CS46 CS-46, CS51 CS-51
Chain catch guard. 094600369 r NEW take off from brand new disassembled saw Fits Efco 147 152
AV handle tank spring mount. 50070024r NEW take off from brand new disassembled saw Fits Efco 147 152
Brake activation tension spring 095000219 r NEW take off from brand new disassembled saw Fits Efco 147 152
Clutch sprocket drum assembly with drum, bearing and .325-7 rim. 50080023 NEW take off from brand new disassembled saw Fits Efco 147 152
Clutch assembly with shoes, carrier and spring. 094500297 R NEW take off from brand new disassembled saw Fits Efco 147 152
Walbro WT562 WT 562 carburetor carb assembly. 50050260 In good used physical shape. May or may not need fresh gaskets and diaphragms Fits Efco Olympyk Oleo-Mac 940 MT4000 MT3600. John Deere CS40 CS-40 and others
Flywheel rotor assembly with pawls and springs. UP10119, 50050240r In good used shape. Fits Efco Olympyk 940, and JD John Deere CS40 CS-40
52mm Bore Complete top end motor kit. Includes: cylinder, piston, rings, wrist pin and keepers. very lightly used OEM part Fits Efco 181, 981, MT-8200
Side cover chainbrake pn# 50072015 Good used , Usable Efco 152, 147, 947, 952
Chain tensioner adjuster kit with screw, pin, and retaining plastic piece 099900368B In good used shape Fits Efco MT 7200 8200 MT8200 MT7200 and others
Part: air filter cover. part # 50200036 R Condition: In good used shape Fits: MT 7200 and 8200 chainsaws
Complete clutch assembly includes: mechanism with shoes, spring, and carrier, drum, bearing, 3/8" pitch sprocket, and washers In good used shape Fits Efco MT 7200 and others
Complete starter recoil rewind assembly cover 50200069 R In good used shape Fits Efco MT 7200, MT 8200, MT8200 and Others
Complete walbro WJ121 carb assembly 2318795 r In excellent used shape Fits Efco MT 7200 8200 MT8200 and others
Part: muffler heat shield exhaust gasket Part # 50070076 Condition: new Fits: Efco 940, and John Deere JD CS40 CS-40
Top cover engine shroud. 094600367 In good used shape Fits Efco Olympyk 941, 946, 951
Part: worm gear Condition:good used, usable Part # 50010036AR Fits: Efco 156, 165, 962,John Deere CS56, CS62
Part: throttle spring Part # 097000028 R Condition: in good used shape Fits: Efco 156, 165, 962, 956, 952, 970, 971, 980, 981
Part: flywheel and starter pawl assembly Part # 52020247r, 52020247AR Condition: in good used shape (starter pawl limiter pin may be sheared off) Fits: Efco 165
Hardware kit with nuts, bolts, screws etc. Everything pictured In good used shape Fits Efco MT 7200 and others
Bucking spike dog bumper 097000109A Take off from a brand new, never run chainsaw Fits Efco MT 7200 and others
Crankcase with crankshaft, bearings, and seals 50192025R. In excellent used shape Fits Efco MT 7200 and others
Part: chainbrake actuating brake spring Part # 099900152 a Condition: in good used shape Fits: Efco Olympyk 980, 981, 956, 962, 970, 156, 165, mt 8200, mt 7200
Part: air filter 097000044R Condition: good used/working shape Fits: Efco 962, 956, 156, 165
Inside bar plate, oil guide 50070055 In good used shape Fits Efco 147 and 152
Part: 3/8 clutch rim sprocket drum and rim Condition: good used shape, with new rim sprocket installed Part # 50022034 Fits: Efco 156, 165, 956, 962, CS-56
50010019a Flywheel Flange In good used shape Fits Efco 156, 165
Small end rod bearing, needle cage. 026400017, 64.00017 NEW Fits Many models of Efco and Olympyk chainsaw
Cylinder top cover. Efco part number 50070193 New Fits Efco 152, 147 new efco bin 2
Part: muffler deflector plate with screws Part # 098000133, 005100913b Condition: good used/working order Fits: Efco MT 8200 7200 MT7200
Part: oil pump Part # 500500204 Condition: new Fits: Efco 940
Chainbrake clutch drive cover, complete with brake assembly. Part number 50012044AR New Fits Efco Oleo-Mac 156, 165
Part: ignition coil Part # 50200001ar, 50200162R Condition: new Fits: Efco MT8200
Piston w/ rings, wrist pin, and clips Efco part number 05006027 New aftermarket part Fits Efco, Oleo Mac, Olympyk 940 and others
Part: digital ignition coil Part # 50020061R Condition: new Fits: efco 165, 156 chainsaw models built after serial # 9667500001
Part: flywheel and starter pawl assembly Part # 52020247r, 52020247AR Condition: new Fits: Efco 165
Part: walbro HDA-160F carburetor Part # 50010302a Condition: new Fits: Efco 165, 156, 962, 956
Part: choke rod link Part # 50010065 Condition: new Fits: efco 962, 156, 956, 165 chainsaws
Part: air filter cover. part # 50200036 R Condition: new Fits: MT 7200 and 8200 chainsaws
Part: cylinder base gasket. Part # 50070047A Condition: new Fits: Efco 947, 952 Location: Efco bin 1
Part: Muffler assembly Condition: Good used/working shape , may or may not have gasket Fits: Efco 952 947 152 147 John Deere CS47 CS52 CS 47 52
Part: outer bucking spike Condition: good used/working shape Fits: Efco 952
Part: Oil pump oiler assembly type 2 Condition: Good used/working shape Fits: Efco 952 and Efco 947
Part Name: muffler heat shield and bolts 50070031 Condition Description: in good used shape-no breaks-light surface rust Fits the Following Models: Efco 952 and Efco 947 152 147 This is a USED part, in good working order.
Part Name: intake manifold bootCondition Description: in good used shape-no breaksFits the Following Models: Efco 952 and Efco 947This is a USED part, in good working order.
Part Name: inner bar plateCondition Description: in good used shape-no breaksFits the Following Models: Efco 952 and Efco 947This is a USED part, in good working order.
Part: oil cap Condition: good used/working shape Fits: Efco 947, 952
Part Name: air filter Condition Description:in good used shape-no tears Fits the Following Models: Efco 947, 952 This is a USED part, in good working order.
Part: starter housing cover Condition: in good used shape Fits: 156 165 and can be retrofit onto 956 962
Oil filler cap 50052005 R Good used shape Fits Efco 940, MT3700, MT4000, MT3500, 152, 147, 952, 947 and many others
Gas fuel filler cap assembly with keeper and O-ring 50072009 Good used shape Fits Efco 147 152 952 947 mt4000 mt3700 mt3500 and others
Part: piston and cylinder kit - includes the rings, wrist pin, keeper clips Part # 50082012, 50070047a, 50082012B Condition: good used shape Fits: Efco 152 and 952
Walbro HDA205D HDA-205 carb carb assembly Good used physical shape. May need a rebuild kit Fits Efco 147 152
Rear handle component with throttle lock NEW take off from brand new disassembled saw. Dusty from storage Fits 132S
Clutch chain cover, chainbrake assembly. Includes: clutch cover, brake handle, hand guard NEW take off from brand new disassembled saw Fits Efco 132 S
Chainbrake brake band. 50240037R NEW from old dealer stock Fits Efco MT 3500
Outer guide bar plate 50070124 a NEW take off from brand new disassembled saw Fits Efco 147 152
Inner guide bar plate 50070055 NEW take off from brand new disassembled saw Fits Efco 147 152
Flywheel rotor with pawls and springs. 50070198 R NEW take off from brand new disassembled saw Fits Efco 147 152
Shortblock motor assembly with piston, cylinder, crankshaft and crankcase complete. 50072051, 50082012 NEW take off from brand new disassembled saw Fits Efco 147 152
Part: brake band and spring Part # 50010039 Condition: in good used shape Fits: Efco 156, 165, 962, 956
Rubber air filter air intake horn flange manifold.. 097000357 In good used shape Fits Efco Olympyk Oleo-Mac 970 980 981 971
Electronic ignition coil. 098000036B 098000036BR 098000036A Tested in good used working order Fits Efco Olympyk Oleo-Mac 970 980 981 971
Part: Top end motor kit includes: cylinder, piston, rings, wrist pin, and keeper clip set. Part # 50012095A, 50012095 A Condition: In good used shape. Fits: Efco Olympyk Oleo-Mac 956, 156. John Deere CS56 CS 56
Throttle trigger and safety interlock. Throttle accel kit. 5002045, 50050096AR In good used shape Fits Efco 152, 147, 952, 947
Outer bar plate 097000275 In good used shape Fits Efco MT 7200 and others
Part: piston and cylinder with rings, pin, keeper clip set, and wrist pin bearing. Part # 50092028, 500920238a Condition: New take off from a brand new chainsaw Fits: Efco Olympyk Oleomac Oleo Mac 165 and 962
Spark arrestor PN# 50010197 New saw take off Efco MT 7200, MT8200
Starter recoil rewind rope spool pulley. 52010439CR In good used shape Fits Efco Oleo-mac 156 165 962 956
Starter pulley rope spool. 52010439CR, 52010439 CR In good used shape Fits Efco Olympyk 956 962 and others
Clutch mechanism with shoes, spring and carrier. 094000129ar, 094000129 ar In good used working shape (corners of cast in center nut are rounded off) Fits Efco Olympyk 940 MT4000 MT 4000 and John Deere JD CS40 CS-40
Bucking spike dog bumper 097000109A In good used shape Fits Efco MT 7200 and others
Top cylinder cover with rubber sealing pieces 50190026 ar, 50190026r In good used shape Fits Efco MT 7200 8200 MT8200 and others
Part: flywheel and pawl kit Part # 52010326 BR, 52012027 Condition: In good used shape Fits: Efco MT 7200 and MT 8200
50mm Bore Complete top end motor kit. Includes: cylinder, piston, rings, wrist pin and keepers. 097000206c In good used shape Fits Efco 970, 971, MT7200
Starter pulley recoil rewind rope spool. 52010485BR, 52010485AR, 52010485 BR AR In good used shape Fits Efco MT7200 MT8200 MT 7200 8200
Starter recoil rewind cover only 50200069 R, 50200069r In good used shape Fits Efco MT 7200, MT 8200, MT8200