Part: set of 4 nuts and retainers for the crankcase Condition: good used/working shape Fits: Homelite 410
Part: right, clutch side crankcase half only Condition: good used/working shape Fits: Jonsered 2071 turbo
Part: set of 6 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 357 xp, 359
Part: Danarm crank case housing with oil pump oiler and bar stud Condition: good used/working shape Fits: Danarm Mark I / 1, II
Part: right clutch side of the crank case housing Condition: good used/working shape. Has some minor chipping. Fits: Jonsered 630
Part: crank case tank chassis. Part # 530-036086 Condition: good used/working shape Fits: Poulan 46cc, 20" chainsaw models
Part: left, flywheel side of the crank case housing Condition: good used/working shape Fits: jonsered 2159 turbo
Part: engine pan bottom Part # 1123 021 2500 Condition: good used/working shape Fits: stihl ms 210, 230, 250
Part: clutch side of the crank case Condition: good used/working shape Fits: dolmar 112, 114
Part: clutch side crank case half with bar studs, bare bones otherwise. PN 1119 020 2901 Condition: good used/working shape Fits: stihl 038
Part: flywheel side crank case half Condition: good used/working shape Fits: Stihl 038
Part: crank case half- bare bones Condition: good used/working shape Fits: Jonsered 630
Part: left (flywheel side) of the crank case Condition: good used/working shape Fits: Pioneer Farmsaw II
Part: crank case half- right, clutch side Condition: good used/working shape Fits: Echo CS 302
Part: right (clutch side) crank case housing half with bar stud set Condition: good used/working shape Fits: Stihl 042, 048
Part: left, flywheel side of the crank case Condition: good used/working shape Fits: Stihl 042, 048
Part: flywheel side crank case half Condition: good used/working shape Fits: Husqvarna 162se
Part: crank case chassis tank half. Condition: worn but usable. Starter screw holes are wallowed out. Fits: Jonsereds 80
Part: clutch side crank case engine housing half with bar studs Condition: good used/working shape. Has chipping/oxidation in metal but is in usable shape with no breaks. Fits: Husqvarna 480cd
Part: flywheel side crank case engine housing half Condition: good used/working shape Fits: Husqvarna 480cd
Part: crank case tank half. Part # 1120 021 0710 Condition: good used/working shape. Fits: Stihl 009
Part: crank case tank Condition: good used/working shape. No leaks. Fits: Husqvarna Practica 40
Part: JO-BU L86 Crank Case Half Tank Housing Condition: good used/working shape
Part: JO-BU L86 Crankcase Half with Bar Studs Condition: good used/working shape
Part: crank case tank housing. Condition: has a minor break on bottom edge but is in good usable shape with no leaks. Fits: Jonsered 630
Part: crank case half - left, flywheel side Condition: good used/working shape Fits: Echo CS 302
Part: crank case with crank shaft, rod and bar studs Fits: Echo cs 60s/ 60 s Condition: good used/working shape
Part: crank case tank with crankshaft and connecting rod. Connecting rod roller bearings loose but included. Condition: good used/working shape Fits:straight off a Stihl 011 avt
Part: crank case housing with crankshaft, connecting rod and bearings Condition: good used/working shape Fits: Echo CS 400 EVL, Echo CS 440 EVL & John Deere 45 EVL
Part: crankcase back plate with bearing A-70896, A70896 Condition: good used/working shape Fits: Homelite 650 750
Part: crank case / tank half – clutch side. With bar studs. Part # 1119 020 2901 Condition: good used/working shape. Metal has some pitting/oxidation Fits: Stihl 038 av
Part: crank case cap / pan 503 18 26-01, 503 18 26-02 Condition: good used/working shape Fits: Jonsered 2054, 2051 2055 Turbo
Part: crank case cover, sprocket side Condition: Has some issues: gouging of the metal and a crack in one section as pictured but is still usable Fits: Remington Super 754
Part: crank case tank with caps 530037511, 530026126, 530-037511, 530-026126Condition: new Fits: Poulan 2400, 2500, 2600, 2900Location: new Poulan Bin 2
Part: crank case half. Part # 1120 021 0760 Condition: good used/working shape. A few broken off grills as pictured. Fits: Stihl 009 L
Part: crankcase half, left flywheel side-casing only Condition: good used/working shape Fits: Husqvarna 272 XP
Part: oil tank crank case Condition: good used/working shape Fits: McCulloch Pro Mac 10-10
Part: crank case tank with bar bolts Condition: good used/working shape Fits: Jonsereds 365
Part: crank case housing / fuel tank Condition: good used/working shape, no leaks Fits: Poulan 2900
Part: Crankcase tank engine chassis Condition: Good used/working shape Fits: Solo 639
Part: crank case housing/tank chassis Condition: good used/working shape-no leaks Fits: Homelite 27 AV
Part: Crank case cover and studs Condition: Good used/working shape Fits: Remington SL11
Part: crankcase housing handle half Condition: Good used/working shape-has some pitting of the metal. Fits: Frontier Mark 1 / I
Part: crank case bottom Condition: good used/working shape Fits: McCulloch Mini Mac 6
Part: Crankcase w/ studs Condition: Good used/working shape Fits: Homelite Super 2
Part: Crankcase oil tank Condition: Good used/working shape Fits: Troy Bilt MS42
Part: Crankcase half Condition: good used/working order Fits: Homelite Super EZ
Part: crankcase cap Condition: good used/working shape Fits: Craftsman (poulan built) 18" chainsaws with model #: 358.351190 and some other models
Part: crankcase pan/cap Condition: good used/working shape Fits: Craftsman (poulan built) 20" 46 cc chainsaws with model #: 358.350202 and some other models
Part: cylinder crankcase, part #215943 and bolts Condition: good used/working shape Fits: McCulloch Power Mac 310, also fits other models
Crank case assembly includes: right clutch side case half, left flywheel side case half, and bearings. 501 68 52-67, 501 52 84-02 Does not include crankcase gasket New old stock from closed out dealer. There are a few chips to the paint and some maybe old oil that does not want to clean up. ...
Part: set of 7 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 266 se
husqvarna 351 clutch side crank case half does not include bearing or seal good used working condition some scratching wear and corrosion. fits husqvarna 351
Part: air duct/ injection tube / jet / shield, part # 537209201 Condition: new old stock from closed out dealer. Fits: husqvarna 570 576, 575xp, 576xp
Part: crank case half (left, flywheel side) 501 68 53 Condition: good used/working shape. Has some minor chipping. Fits: Husqvarna 266 xp
Part: crank case (right, clutch side) Condition: Bearing is NOT good. In good used/working shape Fits: Husqvarna 266 se
Clutch PTO right side crank case half only. 1128 020 2951 In good used shape. Has a crack and a chip missing, but still good and functional Fits Stihl MS 440
Flywheel starter side crank case half only. Half of 11280210762 In good used shape. Fits Stihl MS 440 Magnum
Part: left, flywheel side of the crank case housing Condition: good used/working shape. Has a small hole. Fits: jonsered 2159 turbo
husqvarna 359,357xp clutch side crank case half does not include bearing or seal good used working condition some scratching wear. Has a chip missing - see photos fits husqvarna 359, 357xp
Crank case. Left side. 1125-021-0700 11250210700 In good used shape Fits some models of 034av 036av 036 034 av super
Drivecase with bar studs and chain tensioner In good used shape, bearing and seal may or may not still be usable Fits Lombard Super Lightning and maybe other models. Match to your existing part to be sure.
Right, clutch PTO side crank case half 038111270 Good used shape Fits Dolmar PS7900 PS7300 PS7910 PS7310 PS 7300 7900 7310 7910 6400 PS6400 PS6400c PS 6400c
Part: crankcase seal / spacer part number: 5018049 Condition: new old stock from closed out dealer. Fits: husqvarna 266 266se and some other models
crank case crankcase NEW OEM from old dealer stock - dusty/dirty from years of storage. Fits Partner: older chainsaws and cut off saws R16 R20 R20T R21 R21T R417 R417T R418 R420 R420T R421 R517
crank case crank case with crankshaft and connecting rod 038111160, 038 111 160 038-111-641 038111641 In good used shape Fits Dolmar PS7900 PS7300 PS7910 PS7310 PS 6400 PS6400 6400c 7300 7900 7310 7910
Part: crank case crankcase assembly with crankshaft and connecting rod Part # 10696 Condition: good used shape. Has some dings and scratches. Fits: Poulan 3400, 3700, 3800, 4000
crank case with bar studs Part number 1141 020 3103 B Good used shape. fits MS 271 MS-271
Complete crank case includes: crankshaft and rod assembly, crankshaft bearings, seals, left flywheel side case, and right clutch side case, bar studs In good used shape Fits Stihl MS 261 MS 261 C
Crank case assembly with crankshaft crank shaft and connecting rod Good used shape Fits PS421 PS 421
Part: crank case half, left flywheel side Condition: good used/working shape Fits: jonsered cs2166 cs-2166
Part: clutch side of the crank case housing Part number 5034202 Condition: good used/working shape. Fits: Poulan Pro PP 415, Jonsered 2077 Turbo, 2083
Part: flywheel side of the crank case housing Part number 5034201 Condition: good used/working shape. Fits: Poulan Pro PP 415, Jonsered 2077 Turbo, 2083
Part: crank case cover with bearing Condition: new old stock. Has some oxidation from years of storage Fits: Remington Mighty Mite Automatic, Mighty Mite Bantam, Mighty Mite Deluxe MMA MMB MMD
Crankcase with both case halves, crankshaft, and bearings. 1135 020 2601 In good used shape. Has some chips and dings. Photos for reference. May have dings and chips in other places on the one you receive. May NOT have spike. Fits Stihl MS 361
Part: crank case half (left, flywheel side) Condition: good used/working shape. Has a chip, and still functional. See photos. Fits: Husqvarna 266 se
Part: crank case engine housing Condition: good used/working shape. Not very pretty but completely functional. Fits: Stihl 028
Part: left (flywheel side) crank case tank half Condition: good used/working shape. Has a chip missing - see photos Fits: Husqvarna 575xp, 570
Flywheel starter side crank case half only. 1128 021 0762 Half of 1128 020 2122 In good used shape. Has a chip missing. See photos Fits Stihl MS 440 Magnum
Part: clutch side of the crank case half 1128 020 2901 Condition: good used/working shape, has some scrapes and chips Fits: some models of Stihl 044 AV
Part: crank case housing with crankshaft, connecting rod and bearings Condition: good used/working shape Fits: Echo CS452 vl CS 452 VL
Part: seal retainer with o ring and screws Condition: good used/working order Fits: Husqvarna 262. May fit others
Part: crank case housing with bar studs Condition: good used/working shape Fits: Partner R-16, R-20, R-21 R2 R21 T and others 55cc
PTO clutch side crank case half casting 1140 020 2904 In good used shape. Has some chips and cracks. Fits Stihl MS-362
Flywheel ignition side crank case half casting 1140 020 2611 In good used shape. Has some cracks and dings. Fits Stihl MS-362
Part: crankcase housing fuel / oil tank with bar studs. Condition: good used/working shape Fits: Poulan Pro 4620 and others
Part: shield / deflector Part # 503 54 37-01 Condition: New old stock OEM part Fits: Husqvarna 254, 257, 262
Crankcase half. Left, flyweel side. One side of 501 86 00-04 In good used shape Fits Husqvarna 257, 262, 262xp, and 261
Crankcase half. Right, clutch side. One side of 501 86 00-04 In good used shape Fits Husqvarna 257, 262, 262xp, and 261
Part: flywheel side of the crank case housing Part number 5034201 Condition: good used/working shape. Has small chip. Fits: Jonsered 2077 Turbo
Crankcase, oil and fuel tank. Includes bar studs, fuel lines and filter. Part number 50240165R NEW take off from brand new disassembled saw. May be dusty from storage. Fits Efco MT3500
Flywheel side case half. Left side In good used shape Fits Stihl MS 261 MS-261
Part: crank case tank half. Part # 1114 020 2900 Condition: good used/working shape. Fits: Stihl 020AV
Part: crank case tank half. Part # 1114 021 0700 Condition: good used/working shape. Fits: Stihl 020AV
Part: crank case engine housing 5-2001 Condition: New old dealer stock Fits: Lombard Lightning
Part: set of 6 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 262 xp 257
Crankcase with both case halves and air guide shroud air box 1140-011-3030 1140 087 3001 1140-087-3001 In good used shape Fits Stihl MS 391 MS311 MS 311
Crank case assembly with crankshaft and bar studs, bearings etc. 031 111 022, 031 111 000, 965 518 013, 031 120 001, 905 810 354, 962 900 054, 962 900 051 In good used shape Fits Dolmar 343